FV-200

Focus Venue

FV-200

The FV-200 is the low-mid module of the scalable Concert Sound System Focus Venue. The active high-performance loudspeaker, in combination with the FV-100 high frequency module and PS-800 or PS-850 subs, is the first choice for sound reinforcement of medium to large festivals, stadiums, concert halls, and theatres. The modules are equipped with innovative Fohhn power amp, DSP and digital network technology. Thanks to the Fohhn Beam Steering Technology, the dispersion can be controlled in real time and there is no need to angle the array mechanically. This makes perfect visual integration possible in stage design, architecture and next to large screens.

Main features

8 × 10" long excursion drivers
4 × 1000 W class-D DSP amplifier
frequency range: 60 Hz – 800 kHz
Effectiveness of the directional characteristic down to 60 Hz
Max. SPL: 145 dB (one module)
Fohhn Convertible Dispersion Technology (cardioid)
Convenient real-time control of vertical dispersion with Fohhn Audio Soft
Vertical beam width: 0° to 90°, sound inclination angle: -40° to +40° (adjusted in 0.1° increments)
Fohhn Two Beam Technology
Fohhn Side Lobe Free Technology
Extremely even and balanced sound coverage, from the front to the last row
Fast and safe rigging thanks to integrated Fohhn Interlock System

Colours

Fohhn technologies

Possible interfaces

Technical data

Electroacoustic features

acoustic design

electronically steerable line array speaker

components

4 pairs of 10" (2,5" VC) long excursion speakers Hornloaded Waveguide Design

maximum SPL

145 dB (103 dB @ 100 m)

frequency range

60 Hz – 800 Hz

operational mode

active, 4-channel DSP-amplifier, Class-D

beam dispersion angle, horizontal

90° switchable cardioid/vented omnidirectional

vertical beam width, digitally controlled

0° – 90° in 0.1° increments

vertical inclination angle, digitally controlled

-40° – +40° in 0.1° increments

acoustic centre

0% (bottom) to 100% (top), both beams movable

Features

CAAD simulation data

Electronic features

Controller

Remote control and remote monitoring

Connections and controls

Display LEDs

power rating (nominal/program): according to IEC-60268-5
power rating (peak); maximum SPL: peak, 20 ms with bandpass filtered pink noise signal according to IEC 60268-2 at one octave above the lower limit of the frequency range
sensitivity: 2,83 V at 8 ohms (2 V at 4 ohms, 4 V at 16 ohms) at a distance of 1 m under anechoic fullspace conditions
frequency range: -10 dB under anechoic halfspace-conditions
weight: net weight without optional equipment
Intelligent Protection Circuit (IPC): voltage-controlled semiconductor circuit protecting the HF-driver against overload highly effective and with very short attack time
cut-off frequency: -10 dB under anechoic halfspace-conditions with speaker preset
heat dissipation: pink noise, 6 dB crest, 1/4 Pmax