Produkty

XS-10 active

X Series

XS-10 active

Numer artykułu: 4103-XXXXX

XS-10 active to kompaktowy subwoofer ze zintegrowanym wzmacniaczem klasy D i procesorem DSP. Zapewnia optymalne wsparcie dla kompaktowych głośników w X, Linea, Arc i serii Focus w zakresie niskich tonów. Sub charakteryzuje się precyzyjną reprodukcją niskich częstotliwości, wysoką mocą znamionową oraz uniwersalnością.

Główne cechy

  • 2 × 6,5" głośnik o długim skoku
  • Cyfrowy wzmacniacz klasy D o mocy 1000 W
  • SPL maks.: 120 dB
  • Nieturbulentny projekt portu (NTP)
  • 2 zbalansowane wejścia sygnałowe (XLR/jack plus link-out)
  • 2 × wyjścia Speakon dla pasywnych topów i dodatkowego suba
  • Wbudowane procesory DSP z presetami głośników, EQ, delay, kompresor/limiter itp.
  • Sterowanie za pomocą intuicyjnego panelu sterowania z wyświetlaczem lub Fohhn Audio Soft
  • Obudowa z wysokiej jakości drewna (sklejka brzozowa multiplex)
  • Na życzenie dostępne w kolorach RAL Classic, NCS lub Pantone
  • Opcjonalnie dostępne z odporną na warunki atmosferyczne powłoką PU

Kolory

Fohhn technologie

Dane techniczne

Electroacoustic features

acoustic design
vented design
components
2 × 6,5" long excursion, neodymium
maximum SPL
120 dB
amplifier output
1.000 W
frequency range
40 Hz – 130 Hz

Physical features

enclosure
multiplex birch plywood
dimensions (w × h × d)
approx. 430 × 250 × 440 mm
thread plate for distance piece
M20
weight
approx. 15 kg
standard colours
textured paint, black
handles
1 edge handle
transport wheels
none
front design
acoustic foam
protection grille
steel grille, ball impact resistant, powder-coated

Optional features

optional colours
RAL Classic / NCS / Pantone on request
optional weather protection
polyurethane coating, water-repellent speaker cone impregnation

Electronic features

power supply
195 V – 250 V AC 50/60 Hz, max. 6A
temperature range
0 - 45°C
cooling
convection cooling, force cooling, if necessary termperature-controlled fan
weight (electronics)
approx. 1.8 kg power supply and amplifier

Controller

digital signal processors
2
independent limiters
8
selective 3-band limiting
bass / mid / high
band-specific time constants
yes
filter technology
56-bit double precision
AD (with Analog input)
AD/DA 24 bit / 48 kHz
controls
Select potentiometer, 4 buttons for DSP handling, ground/lift switch, Power on/off switch
indicator LEDs
4 line display, 2 × Signal/Clip LED, 2 × protect LED, receive/send remote LED

Remote control and remote monitoring

remote control
Fohhn Audio Soft, Fohhn Net
remote monitoring
temperature, protect, signals

Connections

inputs
2 × XLR/jacks, multifunctional input jacks
signal
Input jack 2 × XLR Link jacks
mains
2 × Powercon mains jacks in and thru
outputs (for recording or stacking)
2 × NL4 Neutrik Speakon for Top Speaker and Slave Sub, from 130 Hz 2 × 4 ohms (stereo)

integrated digital power amplifier

EIA amplifier power
2 × 500 W (1 kHz, THD+N < 1%)
amplification
32 dB
input sensitivity
1 V
input impedance
10 kOhm
frequency response
20 Hz – 20 kHz
S/N ratio
>105 dBA
protective circuit
switch-on delay, soft start, impedance- and short-circuit protection, DC protect, temperature monitoring

power rating (peak); maximum SPL: peak, 20 ms with bandpass filtered pink noise signal according to IEC 60268-2 at one octave above the lower limit of the frequency range, with speaker preset
frequency range: -10 dB under anechoic halfspace-conditions with speaker preset
weight: net weight without optional equipment

Zastosowania / przypadki użycia

Bądź pierwszym, który się dowie!

Subskrypcja newslettera

Nikt nie lubi spamu - my też nie. Od czasu do czasu będziesz otrzymywał od naszych ekspertów pro audio wiadomości, ogłoszenia i transfery wiedzy istotne dla Ciebie.

Skontaktuj się z nami

+49 7022 93323-0

Formularz kontaktowy Fohhn Newsletter