Produkty

FV-100

  • +8

Focus Venue

FV-100

Numer artykułu: 1315-XXXXX

FV-100 to moduł wysokiej częstotliwości skalowalnego systemu Concert Sound Focus Venue . Aktywny głośnik o wysokiej wydajności, w połączeniu z modułem nisko-średniotonowym FV-200 i subwooferem PS-800 lub PS-850, jest pierwszym wyborem do nagłośnienia średnich i dużych festiwali, stadionów, sal koncertowych i teatrów. Moduły są wyposażone w innowacyjną końcówkę mocy Fohhn, procesor DSP i cyfrową technologię sieciową. Dzięki Fohhn Beam Steering Technologydyspersja może być kontrolowana w czasie rzeczywistym i nie ma potrzeby mechanicznego ustawiania matrycy pod kątem. Umożliwia to doskonałą integrację wizualną w projektach scenicznych, architekturze i obok dużych ekranów.

Główne cechy

  • 8 × 1" i 8 × 1,4" głośnik kompresyjny (cewka 1,75" / 4")
  • 16 × 220 W wzmacniacz DSP klasy D
  • Zakres częstotliwości: 800 Hz - 16 kHz
  • Max. SPL: 150 dB (jeden moduł)
  • Wygodna kontrola rozproszenia pionowego w czasie rzeczywistym za pomocą Fohhn Audio Soft
  • Szerokość wiązki pionowej: od 0° do 90°, kąt nachylenia dźwięku: od -40° do +40° (regulowany co 0,1°)
  • Fohhn Technologia dwóch wiązek
  • Fohhn Side Lobe Free Technology
  • Niezwykle równomierne i zrównoważone pokrycie dźwiękiem, od przodu do ostatniego rzędu
  • Szybkie i bezpieczne mocowanie dzięki zintegrowanemu Fohhn Interlock System
  • Wtyczka Q-SYS dostępna w połączeniu z Fohhn NA-4 lub ABX-6

Kolory

Fohhn technologie

Możliwe interfejsy

Dane techniczne

Electroacoustic features

acoustic design
electronically steerable line array speaker
components
8 × 1" (1.75" VC) , 8 × 1.4" (4" VC) compression drivers Manifold hornloaded Waveguide Design
maximum SPL
150 dB (108 dB @ 100 m)
operational mode
active, 16-channel DSP-amplifier, Class-D
frequency range
800 Hz – 16 kHz
nominal dispersion, horizontal
90°
vertical beam width, digitally controlled
0° – 90° in 0.1° increments
vertical inclination angle, digitally controlled
-40° – +40° in 0.1° increments
acoustic centre
0% (bottom) to 100% (top), both beams movable

Physical features

enclosure
multiplex birch plywood
dimensions (w × h × d)
560 × 639 × 595 mm
weight
approx. 107 kg
standard colours
scratch-proof polyurethane coating, black
front design
hexagonal perforated steel grille in cabinet colour, backed by acoustically transparent foam
mounting points
integrated flying tracks, 4 × M8-threads at rear tracks

CAAD simulation data

simulation data
EASE, Fohhn Designer

Electronic features

amplifier type
Pure Path Digital PWM
audio inputs
AES/EBU
audio outputs
AES/EBU
amplifier power
16 × 220 W
DSP channels
16
frequency response
20 Hz – 20 kHz
signal/noise ratio
>105 dB/A
auto power save
adjustable from 1 s to 12 h, or never active
protective circuit
soft start, overtemperature, short circuit, overload
power supply
100 V – 240 V AC 50/60 Hz, power supply with Power Factor Correction (PFC)
power consumption
500 W RMS, idle 58 W, standby 10 W
heat dissipation
124 W, 427 BTU/h, 107 kcal/h
temperature range
0 – 40°C
cooling
temperature-controlled fan
weight (electronics)
10.9 kg

Controller

digital signal processors
2
independent limiters
6
FIR filter
yes
input gain
-80 dB – +12 dB
routing gain
-80 dB – +12 dB
output gain
-80 dB – +12 dB
EQ
10-band parametric EQ, gain, +/-12 dB, frequency 10 – 20 kHz, Q 0.1 – 100
selective 3-band limiting
bass / mid / high
limiter / compressor
yes
noise gate
yes
X-over
Linkwitz-Riley 4th order (24 dB/octave), high pass 10 Hz – 20 kHz, low pass 10 Hz – 20 kHz
delay input
0 – 350 ms (0 – 120 m)
delay output
0 – 640 ms (0 – 220 m)
system latency
1.2 ms
band-specific time constants
yes
filter technology
80-bit double precision
input
AES/EBU 32 kHz – 96 kHz, 16/24 bit
input DSP processing
yes

Remote control and remote monitoring

remote control
Fohhn Audio Soft, Fohhn Net
remote monitoring
temperature, protect, signals, power supply, Fohhn Net, Fohhn Audio Soft
simulation beam
Fohhn Net, Fohhn Audio Soft

Connections and controls

mains connection
1 × PowerCON mains in, 1 × PowerCon mains out
control elements
mains switch (remote-controllable via AIREA connect)
inputs
1 × etherCON Airea Connect / stack link, 1 × XLR AES/EBU, 1 × etherCON Fohhn-Net
outputs
1 × etherCON stack link, 2 × XLR AES/EBU, 2 × etherCON Fohhn-Net
signal inputs
AES/EBU 32 kHz – 96 kHz, 16/24 bit
signal outputs
AES/EBU link-out from input

Display LEDs

Sign LED (connector panel and front grille)
blue = power on, blue flashing = sign
status LED
green = ready, red = protect/standby, red flashing = fault
receive / send LED
receive/send remote control LED
audio error LED
red = no AES/EBU
remote power LED
green = AIREA connect aktive, remote power on
on (stack link) LED
green = stack link aktive

power rating (peak); maximum SPL: peak, 20 ms with bandpass filtered pink noise signal according to IEC 60268-2 at one octave above the lower limit of the frequency range, with speaker preset
frequency range: -10 dB under anechoic halfspace-conditions with speaker preset
weight: net weight without optional equipment
heat dissipation: pink noise, 6 dB crest, 1/4 Pmax
nominal dispersion: -6 dB compared to the main dispersion axis

Bądź pierwszym, który się dowie!

Subskrypcja newslettera

Nikt nie lubi spamu - my też nie. Od czasu do czasu będziesz otrzymywał od naszych ekspertów pro audio wiadomości, ogłoszenia i transfery wiedzy istotne dla Ciebie.

Skontaktuj się z nami

+49 7022 93323-0

Formularz kontaktowy Fohhn Newsletter