Produits

DLI-230 (installation fixe)

  • +4

Linea Focus

DLI-230 (fixed installation)

Numéro d'article : 1344-XXXXX

La DLI-230 est une enceinte de line source contrôlable électroniquement, issue de la série primée Focus. Ces haut-parleurs de qualité et performants sont le premier choix pour les applications vocales et musicales professionnelles. Grâce à la technologie Fohhn Beam Steering, elles peuvent être intégrées de manière presque invisible et offrent les meilleurs résultats dans les environnements acoustiques complexes.

Caractéristiques principales

  • 16 × 4" haut-parleurs hautes performances (réponse en fréquence : 60 Hz - 17 kHz)
  • Amplificateur de puissance numérique intégré à 16 canaux, 16 canaux DSP
  • SPL max : 130 dB
  • Interface d'entrée au choix Analogique, AES/EBU + Fohhn Airea , Dante Ultimo avec contrôle (DUC) ou Brooklyn avec fibre (DBF). Fohhn Net contrôle (DUC) ou Dante Brooklyn avec fibre (DBF)
  • Contrôle pratique en temps réel de la dispersion verticale avec Fohhn Audio Soft
  • Largeur du faisceau vertical : 0° à 90°, angle d'inclinaison du son : -40° à +40° (réglage par incréments de 0,1°)
  • Centre acoustique déplaçable sur toute la longueur de la colonne
  • Fohhn Technologie à deux faisceaux (deux faisceaux de dispersion indépendants)
  • Fohhn Side Lobe Free Technology (suppression des lobes latéraux)
  • Disponible en RAL, NCS, Pantone et avec Fohhn Texture Design
  • Intégration dans les systèmes d'évacuation selon DIN EN 60849 / VDE 0828
  • Intégration dans les systèmes de contrôle des médias tels que Crestron, AMX, Extron, etc.
  • Plugin Q-SYS disponible
  • Nouveau : assemblage flexible grâce à la gorge en 'T' située à l'arrière

Couleurs

Fohhn technologies

Interfaces possibles

Données techniques

Electroacoustic features

acoustic design
electronically steerable line source speaker
components
16 × 4" impregnated (fully neodymium)
maximum SPL (1 m)
130 dB
operational mode
active, 16 × DSP amplifiers, Class-D
frequency range
60 Hz – 17 kHz
nominal dispersion, horizontal
110°
vertical beam width, digitally controlled
0° to +90° in 0.1° increments
vertical inclination angle, digitally controlled
-40° to +40° in 0.1° increments
acoustic centre
both beams moveable between 0 – 100 % (from speaker bottom to top)

Physical features

enclosure
aluminum
dimensions (w × h × d)
133 × 2308 × 128 mm
weight
approx. 15.1 kg
standard colours
black or white powder coated
front design
front grille in housing colour
protection grille
steel grille, ball impact resistant, powder-coated
mounting points
continuous T-slot at rear

Optional features

optional colours
RAL Classic / NCS / Pantone on request, Fohhn Texture Design

CAAD simulation data

simulation data
EASE, Fohhn Designer

Electronic features

amplifier type
Pure Path Digital PWM
support for AES67
only with Dante versions
DSP channels, Fohhn Audio DSP
16
amplifier power
16 × 100 W
frequency response
20 Hz – 20 kHz
gain
25 dB
input sensitivity
0 dBFS with AES or Dante versions; 1.4 V with Analog
signal/noise ratio
>105 dB/A
tilt sensor
yes
password protection
yes
auto power save
adjustable from 1 s to 12 h, or permanently active
protective circuit
soft start, overtemperature, short circuit, overload
power supply
100 V – 240 V AC 50/60 Hz, power supply with Power Factor Correction (PFC)
power consumption
Standby 5 W, max. 400 W
power factor (PFC)
> 90 %
low power
Green Power Standby Mode
heat dissipation
140 W, 478 BTU/h, 120 kcal/h (Pink Noise, 6 dB crest, 1/4 Pmax)
temperature range
0 – 40 °C
cooling
temperature-controlled fan
weight (electronics)
approx. 3 kg

Controller

digital signal processors
2
independent limiters
6
FIR filter
yes
gain
-80 dB – +12 dB
volume
-80 dB – +12 dB
EQ input
10 fully parametric filters, Gain +/-12 dB, Frequency 10 Hz – 20 kHz, Q 0.1 – 100
EQ output
10 fully parametric filters, Gain +/-12 dB, Frequency 10 Hz – 20 kHz, Q 0.1 – 100
selective 3-band limiting
bass / mid / high
limiter / compressor
2 × Input, 1 × Output
noise gate
2 × Input, 1 × Output
X-over
Linkwitz-Riley 4th order, 24 dB/octave, high pass 10 Hz – 20 kHz, low pass 10 Hz – 20 kHz, 2 × input, 1 × output in each case
delay input
0.01 – 350 ms or 3.4 mm – 120 m each
delay output
0.01 – 650 ms or 3.4 mm – 220 m each
user presets
100
simulation beam
Fohhn Net, Fohhn Audio Soft
system latency
1.8 ms with AES, 2.4 ms with Analog, Dante +1.8 ms with Dante versions
band-specific time constants
yes
filter technology
80-bit double precision
AD (with Analog input)
24 bit / 96 kHz

Inputs and outputs

audio inputs
optionally 1 × AES/EBU + 1 × Airea, 2 × Analog (transformer balanced) or Dante
redundancy
only with Dante DBF version (Dante Primary & Secondary)
audio input channels DSP
2
audio link
only with Analog version (2)

Remote control and remote monitoring

remote control
Fohhn Audio Soft, Fohhn Net
remote monitoring
temperature, protect, signals, power supply, Fohhn Net, Fohhn Audio Soft, tilt sensor, pilot tone
pilot tone monitoring
activatable, detectable in Master (on both inputs)
fault message contact
only with AES or Analog version (1 × relay 2 × alternate, 3-pin Phoenix)
switching contact
only with AES or Analog version (load preset, standby on/off)

Connections

mains connection (internal)
1 × WAGO 2-pin, grounding screwed
signal inputs
AES: Phoenix 3-pin + Phoenix 3-pin Fohhn Net + RJ-45 Airea, Analog: 2 × Phoenix 3-pin + Phoenix 3-pin Fohhn Net, Dante (DUC): RJ-45 100BASE-TX Ethernet (Dante + Fohhn Net), Dante (DBF): 2 × RJ-45 1000BASE-T Ethernet + 2 × SFP port (Dante + Fohhn Net)
signal link
only with AES (1 × Phoenix 3-pin Fohhn Net) or Analog version (2 × Phoenix 3-pol for audio, 1 × Phoenix 3-pin Fohhn Net)
fault message contact
only with AES or Analog version (1 × Phoenix 3-pin, 1 × Phoenix 3-pin link)
switching contact
only with AES or Analog version (1 × Phoenix 3-pin)

Display

power on / off (standby)
only with AES or Analog version (green = on, red = standby, red flashing = fault, blue = sign)
network control
only with AES or Analog version (receive/send remote control LED)

power rating (peak); maximum SPL: peak, 20 ms with bandpass filtered pink noise signal according to IEC 60268-2 at one octave above the lower limit of the frequency range, with speaker preset
frequency range: -10 dB under anechoic halfspace-conditions with speaker preset
weight: net weight without optional equipment
heat dissipation: pink noise, 6 dB crest, 1/4 Pmax
nominal dispersion: -6 dB compared to the main dispersion axis, averaged 1 – 4 kHz

Soyez les premiers informés !

Inscription à la newsletter

Tout le monde déteste le spam, et nous ne faisons pas exception. De manière occasionnelle, vous recevrez des informations, des annonces et des partages de connaissances pertinents de la part de nos spécialistes en audio professionnel.

Contactez nous

+49 7022 93323-0

Formulaire de contact Fohhn Newsletter