Important note: We are currently performing an update on the Fohhn website. If you receive error messages or content is missing, please reload the desired page or try again later. Thanks for your patience!

Wichtiger Hinweis: Wir führen gerade Wartungs- und Updatearbeiten an der Fohhn Website durch. Bitte laden Sie die Seite neu oder versuchen Sie es später erneut, falls Sie Fehlermeldungen erhalten. Danke für Ihre Geduld.

  • +7

Focus Venue

FV-100

Varenummer: 1315-XXXXX

FV-100 er højfrekvensmodulet i det skalerbare Concert Sound System - Focus Venue. Den aktive højtydende højttaler er i kombination med FV-200 low-mid-modulet og PS-800 eller PS-850 subwooferne det perfekte valg til lydforstærkning på mellemstore til store festivaler, stadioner, koncertsale og teatre. Modulerne er udstyret med innovativ Fohhn effektforstærker, DSP og digital netværksteknologi. Takket være Fohhn Beam Steering Technology kan spredningen styres i realtid, og der er ikke behov for mekanisk vinkling af arrayet. Det gør det muligt at opnå en perfekt visuel integration i scenografi, arkitektur og ved siden af store skærme.

Main features

  • 8 × 1" og 8 × 1,4" kompressionsdriver (1,75" / 4" svingspole)
  • 16 × 220 W klasse-D DSP-forstærker
  • frekvensområde: 800 Hz - 16 kHz
  • Max. SPL: 150 dB (et modul)
  • Praktisk realtidskontrol af vertikal spredning med Fohhn Audio Soft
  • Spredningsgrad: 0° til 90°, hældningsgrad: -40° til +40° (justeret i intervaller på 0,1°)
  • Fohhn Two Beam-teknologi
  • Fohhn Side Lobe Free Technology
  • Ekstremt jævn og afbalanceret lyddækning, fra forreste til sidste række
  • Hurtig og sikker rigning takket være det integrerede Fohhn Interlock System
  • Q-SYS Plugin fås i kombination med Fohhn NA-4 eller ABX-6

Farver

Fohhn-teknologier

Mulige interfaces

Tekniske data

Electroacoustic features

acoustic design
electronically steerable line array speaker
components
8 × 1" (1.75" VC) , 8 × 1.4" (4" VC) compression drivers Manifold hornloaded Waveguide Design
maximum SPL
150 dB (108 dB @ 100 m)
frequency range
800 Hz – 16 kHz
operational mode
active, 16-channel DSP-amplifier, Class-D
nominal dispersion, horizontal
90°
vertical beam width, digitally controlled
0° – 90° in 0.1° increments
vertical inclination angle, digitally controlled
-40° – +40° in 0.1° increments
acoustic centre
0% (bottom) to 100% (top), both beams movable

Physical features

enclosure
multiplex birch plywood
front design
hexagonal perforated steel grille in cabinet colour, backed by acoustically transparent foam
weight
approx. 107 kg
standard colours
scratch-proof polyurethane coating, black
mounting points
integrated flying tracks, 4 × M8-threads at rear tracks
dimensions (w × h × d)
560 × 639 × 595 mm

CAAD simulation data

simulation data
EASE, Fohhn Designer

Electronic features

amplifier type
Pure Path Digital PWM
audio inputs
AES/EBU
audio outputs
AES/EBU
amplifier power
16 × 220 W
DSP channels
16
frequency response
20 Hz – 20 kHz
signal/noise ratio
>105 dB/A
auto power save
adjustable from 1 s to 12 h, or never active
protective circuit
soft start, overtemperature, short circuit, overload
power supply
100 V – 240 V AC 50/60 Hz, power supply with Power Factor Correction (PFC)
power consumption
500 W RMS, idle 58 W, standby 10 W
heat dissipation
124 W, 427 BTU/h, 107 kcal/h
temperature range
0 – 40°C
cooling
temperature-controlled fan
weight (electronics)
10.9 kg

Controller

digital signal processors
2
independent limiters
6
FIR filter
yes
input gain
-80 dB – +12 dB
routing gain
-80 dB – +12 dB
output gain
-80 dB – +12 dB
EQ
10-band parametric EQ, gain, +/-12 dB, frequency 10 – 20 kHz, Q 0.1 – 100
selective 3-band limiting
bass / mid / high
limiter / compressor
yes
noise gate
yes
X-over
Linkwitz-Riley 4th order (24 dB/octave), high pass 10 Hz – 20 kHz, low pass 10 Hz – 20 kHz
delay input
0 – 350 ms (0 – 120 m)
delay output
0 – 640 ms (0 – 220 m)
system latency
1.2 ms
band-specific time constants
yes
filter technology
80-bit double precision
input
AES/EBU 32 kHz – 96 kHz, 16/24 bit
input DSP processing
yes

Remote control and remote monitoring

remote control
Fohhn Audio Soft, Fohhn Net
remote monitoring
temperature, protect, signals, power supply, Fohhn Net, Fohhn Audio Soft
simulation beam
Fohhn Net, Fohhn Audio Soft

Connections and controls

mains connection
1 × PowerCON mains in, 1 × PowerCon mains out
control elements
mains switch (remote-controllable via AIREA connect)
inputs
1 × etherCON Airea Connect / stack link, 1 × XLR AES/EBU, 1 × etherCON Fohhn-Net
outputs
1 × etherCON stack link, 2 × XLR AES/EBU, 2 × etherCON Fohhn-Net
signal inputs
AES/EBU 32 kHz – 96 kHz, 16/24 bit
signal outputs
AES/EBU link-out from input

Display LEDs

Sign LED (connector panel and front grille)
blue = power on, blue flashing = sign
status LED
green = ready, red = protect/standby, red flashing = fault
receive / send LED
receive/send remote control LED
audio error LED
red = no AES/EBU
remote power LED
green = AIREA connect aktive, remote power on
on (stack link) LED
green = stack link aktive

power rating (peak); maximum SPL: peak, 20 ms with bandpass filtered pink noise signal according to IEC 60268-2 at one octave above the lower limit of the frequency range, with speaker preset
frequency range: -10 dB under anechoic halfspace-conditions with speaker preset
weight: net weight without optional equipment
heat dissipation: pink noise, 6 dB crest, 1/4 Pmax
nominal dispersion: -6 dB compared to the main dispersion axis

Kontakt os

+49 7022 93323-0

Kontaktformular Fohhn Nyhedsbrev