Description
The active subwoofer XS-22 is manufactured from fine quality multiply birchwood and is the lightest in its class, weighing only approx. 25 kg. It is extremely compact and equipped with the following components:
Digital amplifiers (CLASS D, 15000 W): state-of-the-art technology, extremely efficient, low weight, outstanding impulse characteristics, transparent sound.
Two digital stereo signal processors (Fohhn Audio DSPs): excellent sound at all levels, maximum operating reliability, room presets, integral audio equipment such as EQ, delay, signal processor. 1x 12" long excursion speaker: state-of-the-art neodymium technology, extremely powerful for a full, deep sound.
Easy to operate
A control panel with a blue, four-line LCD display is integrated in the active Sub so that users can adjust and view the DSP functions. The system´s network compatibility and remote control options via a laptop provide you with assistance while you work. For connecting the active Sub to a PC the Fohhn-Net Adaptor NA-1 is necessary.
Fohhn® Mains Control – the integrated mains supply monitoring system
During use, the supply to the amplifier is constantly monitored. If at any time it exceeds the maximum permitted range (180-255 VAC), the supply will be interrupted. During power up it also minimizes the input surge current by switching on at the mains voltage zero crossing.
XS-22 active |
|
| electro-acoustical features | |
| acoustic design | vented design |
| components | 1x 12“ long excursion, neodymium |
| amplifier output | 1.500 W |
| SPL max. | 125 dB |
| frequency range | 38 Hz – 130 Hz |
| features | |
| enclosure | multiply birch wood |
| protection grille | metal, powder coating |
| standard colour | black, textured paint |
| front design | acoustic foam |
| dimensions (W x H x D) | approx. 43 x 39 x 44 cm |
| weight | approx. 25 kg |
| wheels | - |
| handles | 2 edge handle |
| thread plate for distance piece | M20 |
| optional features | |
| optional colours | all RAL-colours |
| weather resistance | scratch-proof plastic coating |
| digital amplifier (integrated in Sub) | |
| EIA amplifier power Tops | 2x 500 W** (1 kHz, THD+N < 1%) |
| amplification | 32 dB |
| input sensitivity | 1 V |
| input impedance | 10 kOhm |
| frequency response | 20 Hz – 20 kHz |
| S/N Ratio | >105 dBA |
| protective circuit | switch-on delay, soft start, impedance- and short-circuit protection, DC protect, temperature monitoring |
| remote control | Fohhn-Net, Fohhn Audio Soft |
| remote monitoring | temperature, protect, signals |
| power supply | 195 V–250 V AC 50/60 Hz, max. 6 A |
| temperature range | 0 - 45°C |
| cooling | convection cooling, force cooling, if necessary termperature-controlled fan |
| weight | ca. 1.8 kg power supply and amplifier |
| **each 4 ohms from 130 Hz via high-pass 6 dB/Okt. | |
| controller | 2 digital signal prozessors 8 independent limiters selektive 3-band limiting (bass/mid/high) band specific time constants 56-bit double precision filter technology AD/DA 24 bit/48 kHz |
| controls | Select potentiometer 4 buttons for DSP handling ground/lift switch Power on/off switch |
| indicator LEDs | 4 line display 2x Signal/Clip LED 2x run/protect LED receive / send remote LED |
| connectors | |
| inputs | 2x XLR/jacks, multifunctional input jacks |
| signal | Input jack 2x XLR Link jacks |
| outputs | 2x NL4 Neutrik Speakon for Top Speaker and Slave Sub from 130 Hz 2x 4 ohms (stereo) |
| mains | 2x Powercon mains jacks in and thru |
| >Fohhn® Mains Control – the integrated mains supply monitoring system< During use, the supply to the amplifier is constantly monitored. If at any time it exceeds the maximum permitted range (180-255 VAC), the supply will be interrupted. During power up it also minimizes the input surge current by switching on at the mains voltage zero crossing. |
Liens & téléchargements:
->Xperience systèmes recommandé
-> Linea Live II système recommandé
Sub passif
-> XSP-22
