X-Top passive

<-- Picture Gallery!






Ultra compact high-quality 6,5"/1" CD speaker, 16 ohm. Time-aligned speaker design, linear frequency response. Integral crossover with electronic driver protection. Outstanding speech intelligibility.

High flexibility
Use of XT-1 with self-powered sub XS-22 or with any professional amplifier. Full-range use on a speaker stand, as a floor monitor or in flown application with bracket VXT-1. Wall mount with bracket WAT-08.

Elegant design
The elegant wooden housing made of high-quality multiply birchwood is available in all RAL-colours. The XT-1 blends effortlessly into its surroundings.

Easy handling
Set up, plug-in and let the event begin. Speakers, amp and processors are tuned perfectly.


Power rating 150 W/300 W*
Components 6,5"/ 1" CD/ time-aligned
Sensitivity 96 dB
SPLmax 123 dB
Frequency response 65 Hz - 20 kHz
Dispersion (h x v) 90° x 60°
Impedance 16 ohms
Dimensions (W x H x D) approx. 19.5 x 38 x 23 cm
Weight approx. 7 kg
Connectors 2x NL4 Neutrik Speakon
Monitor slant 45°
Speaker pole integral, Ø 36 mm
Bracket (optional) VXT-1
Wall bracket (optional) WAT-08
*Peak 20ms  


Transport bag for FP-22, FP-11, FP-Media, padded


Reducing flange, 36mm dia. with 2x M6 wing screw for AT-07/08/09


stand bracket and flying applications for XT-1, speaker rotates and tilts (with stand adapter)


Clamp-1 with threat bolt M10 for traverse mounting

Compact 6.5“/1“ CD Loudspeaker

Compact, passive loudspeaker system, equipped with a 6.5“ low-mid chassis and a 1“ high frequency compression driver. Both neodymium, both time-aligned.

The loudspeaker system has a rotatable Constant Directivity Horn and a defined dispersion angle of 90° x 60°. The speaker housing has a 45° sloping back for use as a monitor.

The system is equipped with an integrated phase optimized crossover that has an active, electronic semiconductor circuit (IPC technology) for high frequency driver protection.

The speaker housing is made from robust, multi-layered birch plywood with a durable black textured paint finish. Optionally available in all RAL Classic colours on request. Also optionally available with a polyurethane coating for additional protection against environmental impact, weather and mechanical wear and tear.

An integral stand adapter enables the speaker to be used on a tripod stand. Optional mounting brackets for loudspeaker orientation on the stand and for flying purposes, with integrated ring eyelets (BGV-1) for securing appropriately.

Connections: 2 x NL 4 Neutrik Speakon

Electroacoustic features:
Components: 6.5“/1“ CD-Horn, Neodymium
Power rating (nominal): 150 W
Power capability (peak*): 300 W
Sensitivity: 96 dB
SPL max: 123 dB
Frequency range: 65 Hz – 20 kHz
Nominal dispersion (H x W): 90° x 60°
Nominal impedance: 16 Ohm

Loudspeaker features:
Enclosure: Birch multiply
Standard colour: Durable black textured paint finish
Dimensions (W x H x D): ca. 19.5 x 38 x 23 cm
Weight: ca. 7 kg
Monitor angle: 45°
Stand adapter: Integrated, Ø 36 mm
Connections: 2 x NL4 Neutrik Speakon

Optional features:
Special colours: all RAL Classic colours
Weather protection: Polyurethane coating for additional protection against environmental impact, weather and mechanical wear and tear
Mounting bracket: VXT-1

Manufacturer: Fohhn Audio AG
Model: XT-1

*Peak 20 ms
Fohhn across the Social Web