ABX-5 - NEW!

AIREA Break Out / In Extensions

<--- PICTURE GALLERY

 

 

The ABX-5 can be used in two ways:
1. As an interface between Dante™ audio networking and the modular active FOHHN FOCUS VENUE loudspeaker system. In this situation, the ABX-5 does not need an additional external power supply.
2. As a Dante™ to AES/EBU Breakout module and FOHHN-NET Ethernet adapter.

In both cases FOHHN-NET control signals will be transmitted via Ethernet.

The ABX-5 is equipped with a Dante™ Brooklyn II module. It has a Dante™ Primary and Secondary port for redundant applications.

Media Control and Monitoring
When using an ABX-5, FOHHN-NET devices can be controlled and monitored via TCP protocol.

Electronic Features  
Audio inputs Dante Primary/Secondary
Audio outputs AES/EBU 24 Bit / 48 kHz, AIREA-NET
Power supply wall wart 12 V – 48 V DC / 5 W, AIREA-NET 48 V
Power consumption 4 W, AIREA-NET Load max. 5 W
   
Connections  
AIREA-NET 1 x RJ-45 out
FOHHN-NET 1 x RJ-45
AES/EBU output 1 x XLR male
Dante™ input 2 x RJ-45 (1000Base-T Ethernet Port)
DC input DC input for wall wart power supply
   
Display LEDs  
Power on green = on (front and back)
FOHHN-NET receive green
FOHHN-NET send yellow
Compact Dante™ to AES/EBU Breakout Module

High-quality breakout module in a lightweight, compact enclosure, which has been developed for two modes of operation.

Firstly, the device can be used as an interface between Dante Audio Networking and an active loudspeaker system with a specific input (RJ-45 in) for digital AES/EBU audio signals and control signals. When used in this way, no additional external power supply is needed.

Secondly, the device can be used as a Dante to AES/EBU breakout module (XLR output). It simultaneously serves as an Ethernet adapter to a digital RS-485 control network for active loudspeaker systems, DSP amplifiers and DSP system controllers.

The device is equipped with a Dante Brooklyn II module. It has a Dante Primary and Secondary port for redundant applications.

Connections: two audio inputs for Dante (RJ-45 (1000Base-T Ethernet Port)); a specific output (RJ-45 out) for digital AES/EBU audio signals, digital control signals and power supply; an output (RJ-45) exclusively for the digital control signals; an output (XLR male), exclusively for the AES/EBU signals; a DC input for the power supply.

Electronic features
Audio inputs: Dante Primary/Secondary
Audio outputs: AES/EBU 24 Bit / 48 kHz, AIREA-NET
Power supply: wall wart 12 V – 48 V DC / 5 W, AIREA-NET 48 V
Power consumption: 4 W, AIREA-NET Load max. 5 W

Connections
AIREA-NET: 1 x RJ-45 out
RS-485 control network: 1 x RJ-45
AES/EBU output: 1 x XLR male
Dante™ input: 2 x RJ-45 (1000Base-T Ethernet Port)
DC input: DC input for wall wart power supply

Display LEDs
Power on: green = on (front and back)
RS-485 control network: green = receive, yellow = send

Manufacturer: Fohhn Audio AG
Model: ABX-5
   
Fohhn across the Social Web