LX-60 ASX

AIREA Speaker Extension

<--- Picture Gallery

 

 

 

 

 

Ultra-compact, active 2-way loudspeaker with DSP, 4 x 4“ / 0.75 high frequency driver, 200 W, AIREA Net-Load: 100 W.

Active loudspeakers with integrated digital amplifier and DSP technology. The amplifier can be regarded as a 2-channel device. This enables separate control of the high frequency and low-mid loudspeakers. In combination with the multi-channel DSPs, this guarantees best possible sound quality, a wide dynamic range, flat frequency response and optimum speaker protection. Three compact full range models and three subwoofers are available in total.

Electro-acoustical features  
Acoustic design active hybrid line source speaker system, 2-way
Components 4x 4" long excursion with treated cones, 1x 1” compression driver on Fohhn®-Waveguide, fully neodymium
Overall power rating (nominal) [1] 200 W
Operating mode active, 2x Class-D DSP amplifier
Maximum SPL [3] 119dB
Frequency range [5] 75Hz - 20kHz
Nominal dispersion (h x v) [6.2] 130° x 30°
   
Features  
Enclosure aluminium housing
Protection grille ball impact resistant steel grille, powder coating
Rigging points 8x M6 threads
Standard colours black or white powder coating
Front design metal grille in enclosure colour, backed by acoustically transparent foam
Dimensions (W x H x D) 130 x 640 x 120 mm
Weight [7] 4,4 kg
   
Optional Features  
Optional colours [8] all RAL Classic colours, Fohhn Texture Design
   
Remote control, Remote monitoring and Simulation  
Remote control AIREA-Net, Fohhn Audio Soft
Remote monitoring temperature, protect, signals, power supply, Fohhn-Net, Fohhn Audio Soft, AES/EBU available
Fault contact -
Simulation beam -
   
Electronic Performance  
Amplifier output 2 x 300W
Amplifier type Pure Path Digital PWM
Audio inputs 2 independent audio channels, AES/EBU 32 kHz -96 kHz, 16/24 Bit
Audio outputs 2 x 300W intern
DSP channels Fohhn Audio DSP
Amplification 30 dB (Ref 1V)
Input sensitivity -6 dB Fullscale
Frequency response 20 Hz - 20 kHz
S/N Ratio >105 dB/A
THD < 0,05% typ. , < 0,01% 1kHz -6dB
Protective circuit Softstart, temperature overload, short circuit, overload
Power supply Airea Net 50V
Handling capacity Standby 5 W, Airea Net Load 100W
Heat dissipation 100 W, 340 BTU/h, 86 kcal/h (Pink Noise, 6 dB crest, 1/4 Pmax)
Power Factor (PFC) > 90 %
Protection integrated semiconductor fuse
Low Power Green Power Standby Mode
Emergency current possible with external USV
Temperature range 0 – 40°C
Cooling passive
Weight electronic 0,3 kg
   
Controllers  
Digital signal processors 2
Independent limiters 4
Selective 3-band limiting bass/ mid/ high
Band specific time constants yes
Filter technology 56-bit double precision
Input AES/EBU 32kHz – 96kHz, 16/24 Bit
FIR filter yes
Gain -80 dB - +12 dB
Volume -80 dB - +12 dB
EQ 10-band parametric EQ
Gain, +/-12 dB
Frequenz 10 -20 kHz
Q 0,1 – 100
Limiter Compressor yes
Noise Gate yes
X-over Linkwitz-Riley 4. order
24 dB/ octave
high pass 10 Hz -20 kHz
low pass 10 Hz - 20 kHz
Delay 0 - 145 ms ( 0 - 50 m)
User presets 100
System latency 0,95 ms
   
Connections  
AIREA-Net 1 x RJ-45 in, 1 x RJ-45 link out
AIREA Net Load 100W
   
Displays  
Power on/ off (standby) green = on
red = standby
red / green flashing = fault
Sign, identification blue, blue flashing
Sign, identification front LED blue, blue flashing
Network control receive/ send remote control LED
   
CAAD Simulation data  
Simulation data EASE
   
   
[1] according to IEC-60268-5 long term  
[3] Peak, 20 ms with bandpass filtered pink noise signal according to IEC 60268-2 at one octave above the lower limit of the frequency range  
[5] -10dB under anechoic halfspace-conditions  
[6.2] horizontal x vertical at -6dB, averaged 1-4 kHz  
[7] net weight without optional equipment  
[8] other RAL colours or NCS available on request  

WAT-08

Wall bracket, universal adjustment 360° for AT-05, AT-061, AT-07, AT-08, AT-09, AT-10, AT-201, AL-50/100/150, LX-60/100/150, adapter plate 90°-rotatable

WAL-1

Pair of L-brackets for Linea LX-100/150, DLI-130/230, LC-20/60/100/150/220 and LEN-20/60/100/150/220

WAT-08k

Wall bracket, universal adjustment 360° for AT-05, AT-061, AT-07, AT-08, AT-09, AT-10, AT-201, AL-50/100/150, LX-100/150, adapter plate 90°-rotatable

SA-6

Stand adapter for Linea LX-100 and LX-150, removable, for mobile applications

Free Stand II + III

Designer stand with heavy round steel base with rubber feet for maximum stability obscured cable guide in the stand and round base. Wt: 14 kg, H: 1200 mm (Freestand II) or 1600 mm (Freestand III), base-diameter: 360 mm. Round base: black or white, stand tube: matt black. Appropriate for: Linea AL-50, AL-100, AL-150, LX-100, LX-150 or Arc Tops AT-05, AT-06, AT-07, AT-08, AT-09

A-2 live Fohhn Digital Audio Interface

The A-2 live has been specially developed to enable a high-quality, trouble-free transfer of digital audio data from a computer to a professional sound reinforcement system.

ABX-1

AIREA Break Out Extension, Analogue interface for AIREA; Analogue and Fohhn-Net output for AIREA, AIREA-Net input, 2 x analogue and 1 x Fohhn-Net output.

AAX-2.300

AIREA 2 x 300W DSP amplifier module. AIREA-Net input, 2 x loudspeaker outputs

AIREA Cable for mobile applications

CAT-5 /AWG 24 network cable for mobile AIREA applications. Roadproof and tread-resistant. Black with Neutrik EtherCON connectors (RJ-45, metal housing).

WLX-100

Wall bracket for LX-60/61, LX-60 ASX, LC-60/100/150 and LEN-60/100/150

Compact, Active 2-Way Hybrid Line Source Speaker with Aluminium Housing for use in a Digital Audio Network System

Active, hybrid line source system with integrated 2-channel digital amplifier and DSP technology, equipped with four high quality 4” long excursion drivers and a 1” compression driver on horn-loaded Waveguide. Use of neodymium chassis and aluminium housing makes the loudspeaker very light in weight – approx. 4.4 kg. Ideally suited to dynamic speech and music reproduction, its elegant design also enables perfect optical integration.

With a capacity of up to 200 W, the speaker can generate a maximum SPL of 119 dB. The loudspeaker has a very precise dispersion of 130° x 30° (h x v) and a wide frequency range from 75 Hz to 20 kHz. Lightweight aluminium housing with rounded sides, black or white powder-coated. Optionally available in all RAL Classic colours and in Fohhn Texture Design. Other colour catalogues are also possible on request. To protect the loudspeaker chassis and electronics, the housing is fitted with a high grade, ball impact resistant, sound permeable front grille made from powder-coated galvanised steel. Eight integrated M6 threaded inserts on the base, rear panel and top are designed to accommodate mounting brackets. CAAD simulation files for EASE are available.

Developed for dedicated use in a digital audio network system that includes active loudspeakers with integrated digital amplifiers and DSP technology, master modules and other system components.

Connections: Input via RJ-45 (Neutrik etherCON) for digital AES/EBU signals, control signals and power supply. Output via RJ-45 link out (Neutrik etherCON) enables serial connection (Daisy Chain) to other system components.

Electroacoustic Features
Acoustic design: active, hybrid line source system, 2-way
Components: 4 x 4“ long excursion chassis, 1 x 1“ compression driver on horn-loaded Waveguide, fully neodymium
Operating mode: active, 2 x Class D DSP amplifiers
Max. sound pressure [1]: 119 dB
Frequency range [2]: 75 Hz – 20 kHz
Nominal dispersion (h x v) [3]: 130° x 30°

General Features
Enclosure: aluminium housing
Protection grille: ball impact resistant, galvanised and powder-coated
Mounting points: 8 x M6 threaded inserts
Standard colours: black or white powder-coated
Front design: front grille in housing colour
Dimensions (W x H x D): ca. 130 x 640 x 120 mm
Weight [4]: ca. 4.4 kg

Optional Features
Special colours : all RAL Classic colours and Fohhn Texture Design, other colour catalogues possible on request

Remote Control and Remote Monitoring
Remote control AIREA-Net, Fohhn Audio Soft
Remote monitoring Temperature, Protect, Signals, Power Supply, Fohhn-Net, Fohhn Audio Soft, AES/EBU available

Electronic Features
Amplifier power: 2 x 300 W
Amplifier type: Pure Path Digital PWM
Audio inputs: 2 independent audio channels, AES/EBU 32 kHz – 96 kHz, 16/24 Bit
DSP: Fohhn Audio DSP
Gain: 30 dB (Ref 1V)
Input sensitivity: -6 dB full scale
Frequency range: 20 Hz – 20 kHz
Signal/Noise ratio: >105 dB/A
THD: <0.05 % typ., <0.01 % 1 kHz -6 dB
Protection circuit: Softstart, Overheating, Short circuit, Overload
Power supply: AIREA-Net 48 V
Power consumption: Standby 5 W, AIREA-Net Load 100 W
Fuse: Semiconductor fuse, internal
Low power: Green Power Standby Mode
Temperature range: 0 °C – 40 °C ambient temperature
Cooling: passive
Weight of electronics: 0.3 kg

Controllers
Digital Signal Processors: 2
Independent limiters: 4
Selective 3-Band limiting: bass/mid/high
Band-specific time constants: yes
Filter technology: 56-bit double precision
Input: AES/EBU 32 kHz – 96 kHz, 16/24 Bit
FIR Filter: yes
Gain: -80 dB – +12 dB
Volume: -80 dB – +12 dB
EQ: 10-band parametric EQ, Gain +/-12 dB, Frequency 10 – 20 kHz, Q 0.1 – 100
Limiter: yes
Noise Gate: yes
X-Over: Linkwitz-Riley 4th Order (24 dB/Octave), High pass 10 Hz – 20 kHz, Low pass 10 Hz – 20 kHz
Delay: 0 – 145 ms (0 – 50 m)
User presets: 100

Connections
AIREA-Net: 1 x Input (RJ-45 /Neutrik etherCON), 1 x link out (RJ-45 / Neutrik etherCON)
AIREA Net Load: 100 W

Display LEDs
Power on/off: green (lit when supply voltage applied, flashing = error)
Standby: red (flashing = error)
Sign, identification: blue, blue flashing
Sign, identification front LED: blue
Network control: receive/send remote control LED

CAAD Simulation Data
Simulation data: EASE

[1] Peak, 20 ms with bandpass filtered pink noise signal according to IEC 60268-2, at one octave above the lower limit of the frequency range
[2] -10 dB under anechoic half space conditions
[3] Horizontal x vertical at -6 dB, average 1 – 4 kHz
[4] Net weight without other components


Manufacturer: Fohhn Audio AG
Model: LX-60 ASX
   
Fohhn across the Social Web