Produits

MA-2.1200

Amplificateur de puissance MA-2.1200

Numéro d'article : 6032-XXXXX

Le MA-2.1200 est un amplificateur numérique compact à 2 canaux doté d'une matrice de routage 4 × 2. Il forme un composant puissant et fiable dans votre installation fixe et est extrêmement flexible et rentable. L'intégration dans les commandes de médias et les réseaux audio est possible sans difficulté et la configuration peut également se faire très facilement via une prise USB-C avec... Fohhn Audio Soft.

Caractéristiques principales

  • Puissance de sortie : 2 × 1200 W / 4 ohms / 100 V / 70 V
  • Disponible en deux variantes : Avec entrées analogiques (MA-2.1200 ANA) ou Dante Entrée (MA-2.1200 DAN)
  • Compact et léger : 1 U, 5,2 kg
  • Supports de montage pour rack inclus
  • Deux contacts de commutation librement programmables
  • Avec Fohhn Airea connexion
  • Peut être télécommandé et contrôlé à distance Fohhn Net
  • Q-SYS Plugin disponible en combinaison avec Fohhn NA-4 ou ABX-6
  • Ventilateur à température contrôlée et à faible bruit
  • Économie d'énergie automatique pour une consommation minimale en mode veille
  • Fohhn les presets de l'enceinte garantissent une sécurité maximale, une fiabilité et une excellente qualité sonore

Couleurs

Fohhn technologies

Interfaces possibles

Données techniques

Physical features

dimensions (w × h × d)
1 U / 19", 440 × 45 × 370 mm
weight
5.2 kg

Electronic features

amplifier technology
Class D
amplifier outputs
2
DSP routing (matrix)
4 × 2
frequency response
20 Hz – 20 kHz
signal/noise ratio
> 103 dB (A)
THD+N
0,15 % (1 kHz, 8 ohms, 3 dB below clipping)
dynamic range
> 120 dB
password protection
yes
auto power save
adjustable from 1 s to 12 h, or never active
protective circuit
over voltage protection, over current protection, over temperature protection, short-circuit protection, DC protection, power on delay, soft start and inrush current limit
power supply
100 – 240 V AC 50/60 Hz, universal power supply with Power Factor Correction (PFC)
power consumption
maximum 700 W, idle state 45 W, Auto Power Save 2 W, standby 2 W
heat dissipation
max. 120 W, 410 BTU/h, 104 kcal/h
temperature range
0 – 40°C
cooling
temperature-controlled fan
output power
2 × 1200 W / 4 ohms, 2 × 600 W / 8 ohms (1 kHz, THD+N < 1 %)
minimum impedance
4 ohms
input channels
4

Controller

digital signal processors
1
independent limiters
20
FIR filter
yes
input gain
-80 dB – +12 dB
routing gain
-80 dB – +12 dB
output gain
-80 dB – +12 dB
EQ
8 × 10 fully parametric filters, gain +/-12 dB, frequency 10 Hz – 20 kHz, Q 0.1 – 100
selective 3-band limiting
bass / mid / high
limiter / compressor
8
noise gate
8
delay
4 × 0 – 145 ms (0 – 50 m) outputs, 4 × 0 – 30 ms (0 – 10 m) inputs
X-over
8 × Linkwitz/Riley 4th order, 24dB/oktave, highpass 10 Hz – 20 kHz, lowpass 10 Hz – 20 kHz
user presets
100
speaker presets
100
system latency
1.2 ms
band-specific time constants
yes
filter technology
80-bit double precision
input
AES/EBU 32 kHz – 96 kHz, 16/24 bit
input DSP processing
yes

Remote control and remote monitoring

remote control
Fohhn Net over RS-485, Fohhn Audio Soft, USB-C
remote monitoring
temperature, protect, signals, power supply, Fohhn Net, Fohhn Audio Soft
switching contact
load preset, standby on / off

Display (front)

ready LED
blue = power on, blue flashing = sign
protect LED
red = error / protect / standby
USB Config LED
blue = host, remote control over USB

Connections and controls

mains connection
1 × C14 IEC socket
switching contact 1 and 2
1 × Phoenix 3-pin
Airea Net
1 × RJ-45
outputs
1 × Phoenix 4-pin, max. 3.3 mm² flexibel, 3.3 mm² rigid
USB Config
1 × USB-C socket

Display (rear)

receive / send LED
remote control, Fohhn Net

Input interface analog

inputs
4 × analog
signal inputs
analog, max. signal +18 dBu, phantompower (24 V DC) switchable
THD
< 0,005 % typ. < 0,003 % 1 kHz 0 dBu
S/N ratio
> 108 dB/A
latency
1.0 ms
frequency response
20 Hz – 20 kHz (+/- 0,3dB @ 8 Ohm)
input impedance
10 kOhms

weight: net weight without optional equipment
heat dissipation: pink noise, 6 dB crest, 1/4 Pmax

Variantes de connexion

Interface d'entrée Dante (DAN)

Features

inputs
1 × RJ-45 100BASE-T Ethernet, Dante, 4 × 48 kHz
latency
Dante + 0.6 ms
support for AES67
yes

Soyez les premiers informés !

Inscription à la newsletter

Tout le monde déteste le spam, et nous ne faisons pas exception. De manière occasionnelle, vous recevrez des informations, des annonces et des partages de connaissances pertinents de la part de nos spécialistes en audio professionnel.

Contactez nous

+49 7022 93323-0

Formulaire de contact Fohhn Newsletter