Produits

FV-200

  • +9

Focus Venue

FV-200

Numéro d'article : 1316-XXXXX

Le FV-200 est le module bas-médium du système de sonorisation de concert évolutif Focus Venue. Ce module actif à haute performance, combiné au module haute fréquence FV-100 et aux caissons de basses PS-800 ou PS-850, est le premier choix pour la sonorisation de festivals, stades, salles de concert et théâtres de taille moyenne à grande. Les modules sont équipés de la technologie innovante d'amplificateur de puissance, de DSP et de réseau numérique de Fohhn. Grâce à la technologie Fohhn Beam Steering, la dispersion peut être contrôlée en temps réel et il n'est pas nécessaire d'anguler le système mécaniquement. Cela permet une intégration visuelle parfaite dans la conception de la scène, l'architecture et à côté des grands écrans.

Caractéristiques principales

  • 8 haut-parleurs 10" longue excursion
  • 4 × 1000 W amplificateur DSP de classe D
  • la bande de fréquence : 60 Hz - 800 Hz
  • Efficacité de la caractéristique directionnelle jusqu'à 60 Hz
  • SPL max. SPL : 145 dB (un module)
  • Fohhn Convertible Dispersion Technology (cardioïde)
  • Contrôle pratique en temps réel de la dispersion verticale avec Fohhn Audio Soft
  • Largeur du faisceau vertical : 0° à 90°, angle d'inclinaison du son : -40° à +40° (réglage par incréments de 0,1°)
  • Fohhn Technologie à deux faisceaux
  • Fohhn Side Lobe Free Technology
  • Couverture sonore extrêmement homogène et symétrique, de la première à la dernière rangée.
  • Montage rapide et sûr grâce au système intégré Fohhn Interlock System
  • Q-SYS Plugin disponible en combinaison avec Fohhn NA-4 ou ABX-6

Couleurs

Fohhn technologies

Interfaces possibles

Données techniques

Electroacoustic features

acoustic design
electronically steerable line array speaker
components
4 pairs of 10" (2,5" VC) long excursion speakers Hornloaded Waveguide Design
maximum SPL
145 dB (103 dB @ 100 m)
operational mode
active, 4-channel DSP-amplifier, Class-D
frequency range
60 Hz – 800 Hz
nominal dispersion, horizontal
90° switchable cardioid/vented omnidirectional
vertical beam width, digitally controlled
0° – 90° in 0.1° increments
vertical inclination angle, digitally controlled
-40° – +40° in 0.1° increments
acoustic centre
0% (bottom) to 100% (top), both beams movable

Physical features

enclosure
multiplex birch plywood
dimensions (w × h × d)
560 × 1276 × 595 mm
weight
approx. 135 kg
standard colours
scratch-proof polyurethane coating, black
front design
hexagonal perforated steel grille in cabinet colour, backed by acoustically transparent foam
mounting points
integrated flying tracks, 4 × M8-threads at rear tracks

CAAD simulation data

simulation data
EASE, Fohhn Designer

Electronic features

amplifier type
Pure Path Digital PWM
audio inputs
AES/EBU
audio outputs
AES/EBU
amplifier power
4 × 1000 W
DSP channels
4
frequency response
20 Hz – 20 kHz
signal/noise ratio
>105 dB/A
auto power save
adjustable from 1 s to 12 h, or never active
protective circuit
soft start, overtemperature, short circuit, overload
power supply
100 V – 240 V AC 50/60 Hz, power supply with Power Factor Correction (PFC)
power consumption
1200 W RMS, idle 70 W, standby 10 W
heat dissipation
300 W, 1024 BTU/h, 258 kcal/h
temperature range
0 – 40°C
cooling
temperature-controlled fan
weight (electronics)
14.2 kg

Controller

digital signal processors
2
independent limiters
6
FIR filter
yes
input gain
-80 dB – +12 dB
routing gain
-80 dB – +12 dB
output gain
-80 dB – +12 dB
EQ
10-band parametric EQ, gain, +/-12 dB, frequency 10 – 20 kHz, Q 0.1 – 100
selective 3-band limiting
bass / mid / high
limiter / compressor
yes
noise gate
yes
X-over
Linkwitz-Riley 4th order (24 dB/octave), high pass 10 Hz – 20 kHz, low pass 10 Hz – 20 kHz
delay input
0 – 350 ms (0 – 120 m)
delay output
0 – 640 ms (0 – 220 m)
system latency
1.2 ms
band-specific time constants
yes
filter technology
80-bit double precision
input
AES/EBU 32 kHz – 96 kHz, 16/24 bit
input DSP processing
yes

Remote control and remote monitoring

remote control
Fohhn Audio Soft, Fohhn Net
remote monitoring
temperature, protect, power supply, Fohhn Net, Fohhn Audio Soft, AES/EBU signals
simulation beam
Fohhn Net, Fohhn Audio Soft

Connections and controls

mains connection
1 × PowerCON mains in, 1 × PowerCon mains out
control elements
mains switch (remote-controllable via AIREA connect)
inputs
1 × etherCON Airea Connect / stack link, 1 × XLR AES/EBU, 1 × etherCON Fohhn-Net
outputs
1 × etherCON stack link, 2 × XLR AES/EBU, 2 × etherCON Fohhn-Net
signal inputs
AES/EBU 32 kHz – 96 kHz, 16/24 bit
signal outputs
AES/EBU link-out from input

Display LEDs

Sign LED (connector panel and front grille)
blue = power on, blue flashing = sign
status LED
green = ready, red = protect/standby, red flashing = fault
receive / send LED
receive/send remote control LED
audio error LED
red = no AES/EBU
remote power LED
green = AIREA connect aktive, remote power on
on (stack link) LED
green = stack link aktive

power rating (peak); maximum SPL: peak, 20 ms with bandpass filtered pink noise signal according to IEC 60268-2 at one octave above the lower limit of the frequency range, with speaker preset
frequency range: -10 dB under anechoic halfspace-conditions with speaker preset
weight: net weight without optional equipment
heat dissipation: pink noise, 6 dB crest, 1/4 Pmax
nominal dispersion: -6 dB compared to the main dispersion axis

Soyez les premiers informés !

Inscription à la newsletter

Tout le monde déteste le spam, et nous ne faisons pas exception. De manière occasionnelle, vous recevrez des informations, des annonces et des partages de connaissances pertinents de la part de nos spécialistes en audio professionnel.

Contactez nous

+49 7022 93323-0

Formulaire de contact Fohhn Newsletter