Produits

DI-2.2000

Amplificateur de puissance DI-2.2000

Numéro d'article : 6010-XXXXX

Le DI-2.2000 est un amplificateur numérique à 2 canaux fabriqué en Allemagne. Les amplificateurs DSP développés et fabriqués par Fohhn offrent une densité de puissance élevée et un son excellent. Les amplificateurs sont conçus pour les systèmes de sonorisation mobiles et les installations fixes. Ils offrent toutes les fonctionnalités essentielles et une connectivité quasi illimitée en termes d'entrées audio. Qu'ils soient AES/EBU, Dante ou analogiques, ils offrent une flexibilité maximale grâce à des modules de connexion interchangeables. Les presets d'enceinte correspondants garantissent des performances et une fiabilité optimales.

Caractéristiques principales

  • Puissance de sortie : 2 × 2000 W / 4 ohms / 100 V / 70 V
  • Peut être télécommandé et contrôlé à distance Fohhn Net
  • DSP étendu, contrôlable en temps réel à l'aide de la fonction Fohhn Audio Soft
  • Plugin Q-SYS disponible
  • Maintien de la puissance maximale pendant plusieurs secondes
  • Ventilateur à température contrôlée et à faible bruit
  • Économie d'énergie automatique pour une consommation minimale en mode veille
  • Taille d'installation : 2 U / 19"
  • Poids léger, seulement 9,6 kg

Couleurs

Fohhn technologies

Interfaces possibles

Données techniques

Physical features

dimensions (w × h × d)
2 U / 19", 485 × 89 × 425 mm
weight
9.6 kg

Electronic features

amplifier technology
Class D
amplifier outputs
2
DSP routing (matrix)
4 × 2
frequency response
20 Hz – 20 kHz (+/- 0,3dB @ 8 Ohm)
signal/noise ratio
>100 dB (A)
THD+N
0.08 % (1 kHz, 8 ohms, 3 dB below clipping)
dynamic range
>120 dB
password protection
yes
auto power save
adjustable from 1 s to 12 h, or never active
protective circuit
over voltage protection, over current protection, over temperature protection, short-circuit protection, DC protection, power on delay, soft start and inrush current limit
power supply
100 – 240 V AC 50/60 Hz, universal power supply with Power Factor Correction (PFC)
power consumption
Maximum (RMS) 1200 W, idle state 50 W, auto power save 10 W, standby 5 W, power on/off switch / remote power off 2 W
heat dissipation
Maximal 200 W, 680 BTU/h, 172 kcal/h
temperature range
0 – 40 °C
cooling
temperature-controlled fan
output power
2 × 2000 W / 4 ohms / 100 V / 70 V, 2 × 1000 W / 8 ohms (1 kHz, THD+N <1 %)
minimum impedance
4 ohms
input channels
4

Controller

digital signal processors
2
independent limiters
12
FIR filter
yes
input gain
-80 dB – +12 dB
routing gain
-80 dB – +12 dB
output gain
-80 dB – +12 dB
EQ
6 × 10 fully parametric filters, gain +/-12 dB, frequency 10 Hz – 20 kHz, Q 0.1 – 100
selective 3-band limiting
bass / mid / high
limiter / compressor
6
noise gate
6
delay
2 × 0 – 350 ms (0 – 120 m) outputs, 4 × 0 – 88 ms (0 – 30 m) inputs
X-over
6 × Linkwitz-Riley 4th order (24 dB/octave), high pass 10 Hz – 20 kHz, low pass 10 Hz – 20 kHz
user presets
100
speaker presets
100
system latency
1.2 ms
band-specific time constants
yes
filter technology
80-bit double precision
input
AES/EBU 32 kHz – 96 kHz, 16/24 bit
input DSP processing
yes

Remote control and remote monitoring

remote control
Fohhn Net over RS-485, Fohhn Audio Soft
remote monitoring
temperature, protect, signals, power supply, Fohhn Net, Fohhn Audio Soft
fault message contact
1 × Relais, 2 × UM, 3-pin Phoenix
switching contact
load preset, standby on/off

Display (front)

receive / send LED
remote control, Fohhn-Net
ready LED
blue = Power on, blue flashing = Sign
protect LED
red = Error / Protect / Standby
input LED
4 × input signal LED, white = signal (> -50 dBFS), red = clip (> -3 dBFS)
output LED
2 × output signal LED, white = signal (> -50 dBFS)

Connections and controls

controls
Power on/off Switch
mains connection
1 × PowerCON
fault contact (open/close)
1 × Phoenix 3-pin
switching contact 1 and 2
1 × Phoenix 3-pin
remote power in / out
2 × Phoenix 2-pin
power supply for extern small devices 24 V / 5 W
1 × Phoenix 2-pin
24 V / 5 W power LED
green = on
USB Config
1 × USB-C socket

weight: net weight without optional equipment
heat dissipation: pink noise, 6 dB crest, 1/4 Pmax

Variantes de connexion

Interface d'entrée standard (AES/EBU)

Features

inputs
2 × Phoenix 3-pin AES/EBU, 1 × Phoenix 3-pin Fohhn-Net
outputs
2 × Phoenix 3-pin AES/EBU, 1 x Phoenix 3-pin Fohhn-Net
signal inputs
AES/EBU 32 kHz – 96 kHz, 16/24 bit
signal outputs
AES/EBU link out from input
latency
0.0 ms

Interface d'entrée AES/EBU XLR

Features

inputs
2 × XLR AES/EBU, 1 × etherCON Fohhn-Net
outputs
2 × XLR AES/EBU, 1 x etherCON Fohhn-Net
signal inputs
AES/EBU 32 kHz – 96 kHz, 16/24 bit
signal outputs
AES/EBU link out from input
latency
0.0 ms

Interface d'entrée analogique XLR

Features

inputs
4 × XLR analogue, 1 × etherCON Fohhn-Net
outputs
4 × XLR analogue, 1 × etherCON Fohhn-Net
signal inputs
analog, max. level +15 dBu
signal outputs
analog link out from input
frequency response
20 Hz – 20 kHz
THD
<0.003 % typ., <0.0005 % 1 kHz 0 dBu
S/N ratio
>110 dB/A
input impedance
10 k ohms
latency
1.0 ms

Interface d'entrée Dante Ultimo (DUC)

Features

integration in media control
UDP text protocol
support for AES67
Yes
latency
Dante +0.6 ms
inputs
1 × RJ-45 100BASE-T Ethernet, Dante and Fohhn-Net
audio input channels
4
audio link
No
redundancy
No

Option de sortie Speakon

Features

outputs
2 × Speakon

Option de sortie en borniers

Features

outputs
1 × Phoenix 4-pin
conductor cross-section
max. 6 mm² flexible, 10 mm² rigid

Soyez les premiers informés !

Inscription à la newsletter

Tout le monde déteste le spam, et nous ne faisons pas exception. De manière occasionnelle, vous recevrez des informations, des annonces et des partages de connaissances pertinents de la part de nos spécialistes en audio professionnel.

Contactez nous

+49 7022 93323-0

Formulaire de contact Fohhn Newsletter