Produits

DFM-110

Focus Modular

DFM-110

Numéro d'article : 1341-XXXXX

DFM-110 est un module actif à haute fréquence doté de la technologie Fohhn Beam Steering . Il peut être combiné de manière flexible avec les modules bas-médium DFM-400. La nouvelle génération de notre célèbre système Focus Modular est désormais entièrement numérisée et offre des connexions de signaux numériques et de Fohhn DSP et des connexions de signaux numériques. Repensé sur le plan acoustique et équipé de haut-parleurs encore plus puissants, le DFM offre un son audiophile d'excellente qualité et la meilleure intelligibilité de la parole. Une solution de haute qualité et de haute performance pour les grandes salles de conférence, les théâtres et même les concerts en plein air. Et tout cela avec une ébénisterie d'à peine 22 cm de large qui peut être pilotée en ligne droite et intégrée de manière transparente grâce à l'orientation des faisceaux.

Caractéristiques principales

  • 16 haut-parleurs à compression de 1" avec bobine mobile de 1,75", à charge de corne avec guide d'ondes
  • 16 amplificateurs intégrés de classe D
  • Structure Fohhn DSP structure à l'intérieur
  • Flux de signal entièrement numérique de l'entrée à l'amplificateur
  • Q-SYS Plugin disponible en combinaison avec Fohhn NA-4 ou ABX-6
  • Max. SPL module unique : 148 dB (108 dB à 100 m)
  • Dispersion verticale contrôlée en temps réel par Fohhn Audio Soft
  • Largeur du faisceau vertical : 0° à 90°, angle d'inclinaison du son : -40° à +40° (réglage par incréments de 0,1°)
  • deux faisceaux distincts peuvent être contrôlés
  • Fohhn Side Lobe Free Technology
  • Gréement facile grâce au système Quicklock de Fohhn

Couleurs

Fohhn technologies

Interfaces possibles

Données techniques

Electroacoustic features

acoustic design
electronically steerable line array speaker
components
16 × 1" (1.75" VC) compression drivers Hornloaded Waveguide Design
maximum SPL
148 dB (108 dB @ 100 m)
operational mode
active, 16-channel DSP-amplifier, Class-D
frequency range
1.7 kHz – 16 kHz
horizontal dispersion
90°
vertical beam width, digitally controlled
0° – 90° in 0.1° increments
vertical inclination angle, digitally controlled
-40° – +40° in 0.1° increments
acoustic centre
0% (bottom) to 100% (top) movable, both beams

Physical features

enclosure
multiplex birch playwood, Aluminium
dimensions (w × h × d)
224 × 1285 × 274 mm
weight
41 kg
standard colours
textured paint / powder coating, black
front design
hexagonal perforated steel grille in enclosure colour, backed by acoustically transparent foam
protection grille
steel grille, ball impact resistant, powder-coated
mounting points
integrated flying tracks, 4 × M8-threads at rear

Optional features

optional colours
RAL Classic / NCS / Pantone on request

CAAD simulation data

simulation data
EASE, Fohhn Designer

Electronic features

amplifier type
Pure Path Digital PWM
audio inputs
AES/EBU
audio outputs
AES/EBU
amplifier power
16 × 120 W
DSP channels
16
frequency response
20 Hz – 20 kHz
signal/noise ratio
>105 dB/A
auto power save
adjustable from 1 s to 12 h, or never active
protective circuit
soft start, overtemperature, short circuit, overload
power supply
100 V – 240 V AC 50/60 Hz, power supply with Power Factor Correction (PFC)
inrush current
7,5 A (230 V) / 3,8 A (115 V)
power consumption
500 W RMS, idle 30 W, standby 10 W
heat dissipation
140 W, 482 BTU/h, 121 kcal/h
temperature range
0 – 40° C
cooling
temperature-controlled fan
weight (electronics)
5.5 kg

Controller

digital signal processors
2
independent limiters
6
FIR filter
yes
gain
-80 dB – +12 dB
EQ
10-band parametric EQ, gain, +/-12 dB, frequency 10 – 20 kHz, Q 0.1 – 100
selective 3-band limiting
bass / mid / high
limiter / compressor
yes
noise gate
yes
delay
Input: 0 – 350 ms (0 – 120 m); Output: 0 – 640 ms (0 – 220 m)
X-over
Linkwitz-Riley 4th order (24 dB / octave), high pass 10 Hz – 20 kHz, low pass 10 Hz – 20 kHz
system latency
1.2 ms
band-specific time constants
yes
filter technology
80-bit double precision
input
AES/EBU 32 kHz – 96 kHz, 16/24 bit
input DSP processing
yes

Remote control and remote monitoring

remote control
Fohhn Audio Soft, Fohhn Net
remote monitoring
temperature, protect, signals, power supply, Fohhn Net, Fohhn Audio Soft
simulation beam
Fohhn Net, Fohhn Audio Soft

Connections and controls

controls
mains switch (remote-controllable via Airea Connect)
mains connection
1 × PowerCON mains in, 1 × PowerCon mains out
inputs
1 × etherCON Airea Connect / stack link, 1 × XLR AES/EBU, 1 × etherCON Fohhn Net
outputs
1 × etherCON stack link, 2 × XLR AES/EBU, 2 × etherCON Fohhn Net
signal inputs
AES/EBU 32 kHz – 96 kHz, 16/24 bit
signal outputs
AES/EBU link-out from input

Display LEDs

Sign LED (connector panel and front grille)
blue = power on, blue flashing = sign
status LED
green = ready, red = protect / standby, red flashing = fault
receive / send LED
receive / send remote control LED
audio error LED
red = no AES/EBU
remote power LED
green = Airea Connect active, remote power on
on (stack link) LED
green = stack link active

power rating (peak); maximum SPL: peak, 20 ms with bandpass filtered pink noise signal according to IEC 60268-2 at one octave above the lower limit of the frequency range, with speaker preset
frequency range: -10 dB under anechoic halfspace-conditions with speaker preset
weight: net weight without optional equipment
heat dissipation: pink noise, 6 dB crest, 1/4 Pmax
nominal dispersion: -6 dB compared to the main dispersion axis

Soyez les premiers informés !

Inscription à la newsletter

Tout le monde déteste le spam, et nous ne faisons pas exception. De manière occasionnelle, vous recevrez des informations, des annonces et des partages de connaissances pertinents de la part de nos spécialistes en audio professionnel.

Contactez nous

+49 7022 93323-0

Formulaire de contact Fohhn Newsletter