Produits

AAX-2.300

Airea

AAX-2.300

Numéro d'article : 1720-XXXXX

Le AAX-2.300 est un module d'amplification qui permet d'intégrer des enceintes passives dans un système Fohhn Airea .

Caractéristiques principales

  • Connexion : Fohhn Airea (connecteur réseau RJ-45)
  • Sorties haut-parleurs : 2 × Speakon
  • Puissance de l'amplificateur : 2 × 300 W (4 ohms)
  • Consommation électrique : via Fohhn Airea , charge nette max. 200 W
  • Amplificateur numérique DSP (type Pure Path Digital)
  • Q-SYS Plugin disponible en combinaison avec Fohhn NA-4 ou ABX-6

Couleurs

Fohhn technologies

Interfaces possibles

Données techniques

Physical features

dimensions (w × h × d)
170 × 60 × 130 mm

Electronic features

amplifier technology
Pure Path Digital PWM
input sensitivity
-6 V
audio inputs
2 independent audio channels, AES/EBU 32 kHz – 96 kHz, 16/24 Bit
audio outputs
2 × 300 W to 2 × Speakon
frequency response
20 Hz – 20 kHz
gain
30 dB
signal/noise ratio
>105 dB/A
THD
<0,05 % typ., <0,01 % 1 kHz -6 dB
protective circuit
soft start, overtemperature, short circuit, overload
power supply
Airea-Net 48 V
power consumption
Standby 5 W, AIREA-Net Load max. 200 W
protection
integrated semiconductor fuse
low power
Green Power Standby Mode
emergency current
with extern USV
heat dissipation
40 W, 135 BTU/h, 34 kcal/h (Pink Noise, 6 dB crest, 1/4 Pmax)
cooling
passive
output power
2 × 300 W
minimum impedance
4 ohms

Controller

digital signal processors
4
independent limiters
8
FIR filter
yes
gain
-80 dB – +12 dB
volume
-80 dB – +12 dB
EQ
2 × 10 fully parametric filters, gain +/-12 dB, frequency 10 Hz – 20 kHz, Q 0.1 – 100
selective 3-band limiting
bass / mid / high
limiter / compressor
2
noise gate
2
delay
2 × 0 – 72 ms (0 – 25 m)
X-over
Linkwitz-Riley 4. order, 24 dB/octave, high pass 10 Hz – 20 kHz, low pass 10 Hz – 20 kHz
user presets
100
band-specific time constants
yes
filter technology
56-bit double precision
input
AES/EBU 32 kHz – 96 kHz, 16/24 Bit

Display LEDs

sign, identification front LED
blue, blue flashing
network control
receive/send remote control LED
power on / off (standby)
green = on, red = standby, flashing = fault
standby
red, flashing = fault
sign, identification
blue, blue flashing

heat dissipation: pink noise, 6 dB crest, 1/4 Pmax

Soyez les premiers informés !

Inscription à la newsletter

Tout le monde déteste le spam, et nous ne faisons pas exception. De manière occasionnelle, vous recevrez des informations, des annonces et des partages de connaissances pertinents de la part de nos spécialistes en audio professionnel.

Contactez nous

+49 7022 93323-0

Formulaire de contact Fohhn Newsletter