• +2

Focus Venue

FV-200

Número de artículo: 1316-XXXXX

El FV-200 es el módulo de bajos-medios del sistema escalable Concert Sound Focus Venue . Este altavoz activo de alto rendimiento, en combinación con el módulo de alta frecuencia FV-100 y los subwoofers PS-800 o PS-850, es la primera opción para el refuerzo sonoro de festivales medianos y grandes, estadios, salas de conciertos y teatros. Los módulos están equipados con la innovadora tecnología de amplificación de potencia, DSP y red digital de Fohhn. Gracias a Fohhn Beam Steering Technology, la dispersión puede controlarse en tiempo real y no es necesario inclinar el array mecánicamente. Esto hace posible una perfecta integración visual en la escenografía, la arquitectura y junto a grandes pantallas.

Características principales

  • 8 × 10" drivers de larga excursión
  • 4 × 1000 W amplificador DSP de clase D
  • gama de frecuencias: 60 Hz - 800 Hz
  • Eficacia de la característica direccional hasta 60 Hz
  • Max. SPL: 145 dB (un módulo)
  • Fohhn Convertible Dispersion Technology (cardioide)
  • Cómodo control en tiempo real de la dispersión vertical con Fohhn Audio Soft
  • Ancho del haz vertical: de 0° a 90°, ángulo de inclinación del sonido: de -40° a +40° (ajustado en incrementos de 0,1°)
  • Tecnología de dos haces de Fohhn
  • Tecnología Fohhn Side Lobe Free
  • Cobertura sonora extremadamente uniforme y equilibrada, desde la primera hasta la última fila
  • Un aparejo rápido y seguro gracias a la integración de Fohhn Interlock System
  • Q-SYS Plugin disponible en combinación con Fohhn NA-4 o ABX-6

Colores

Tecnologías Fohhn

Posibles interfaces

Datos técnicos

Electroacoustic features

acoustic design
electronically steerable line array speaker
components
4 pairs of 10" (2,5" VC) long excursion speakers Hornloaded Waveguide Design
maximum SPL
145 dB (103 dB @ 100 m)
frequency range
60 Hz – 800 Hz
operational mode
active, 4-channel DSP-amplifier, Class-D
nominal dispersion, horizontal
90° switchable cardioid/vented omnidirectional
vertical beam width, digitally controlled
0° – 90° in 0.1° increments
vertical inclination angle, digitally controlled
-40° – +40° in 0.1° increments
acoustic centre
0% (bottom) to 100% (top), both beams movable

Physical features

enclosure
multiplex birch plywood
front design
hexagonal perforated steel grille in cabinet colour, backed by acoustically transparent foam
weight
approx. 135 kg
standard colours
scratch-proof polyurethane coating, black
mounting points
integrated flying tracks, 4 × M8-threads at rear tracks
dimensions (W × H × D)
560 × 1276 × 595 mm

CAAD simulation data

simulation data
EASE, Fohhn Designer

Electronic features

amplifier type
Pure Path Digital PWM
audio inputs
AES/EBU
audio outputs
AES/EBU
amplifier power
4 × 1000 W
DSP channels
4
frequency response
20 Hz – 20 kHz
signal/noise ratio
>105 dB/A
auto power save
adjustable from 1 s to 12 h, or never active
protective circuit
soft start, overtemperature, short circuit, overload
power supply
100 V – 240 V AC 50/60 Hz, power supply with Power Factor Correction (PFC)
power consumption
1200 W RMS, idle 70 W, standby 10 W
heat dissipation
300 W, 1024 BTU/h, 258 kcal/h
temperature range
0 – 40°C
cooling
temperature-controlled fan
weight (electronics)
14.2 kg

Controller

digital signal processors
2
independent limiters
6
FIR filter
yes
input gain
-80 dB – +12 dB
routing gain
-80 dB – +12 dB
output gain
-80 dB – +12 dB
EQ
10-band parametric EQ, gain, +/-12 dB, frequency 10 – 20 kHz, Q 0.1 – 100
selective 3-band limiting
bass / mid / high
limiter / compressor
yes
noise gate
yes
X-over
Linkwitz-Riley 4th order (24 dB/octave), high pass 10 Hz – 20 kHz, low pass 10 Hz – 20 kHz
delay input
0 – 350 ms (0 – 120 m)
delay output
0 – 640 ms (0 – 220 m)
system latency
1.2 ms
band-specific time constants
yes
filter technology
80-bit double precision
input
AES/EBU 32 kHz – 96 kHz, 16/24 bit
input DSP processing
yes

Remote control and remote monitoring

remote control
Fohhn Audio Soft, Fohhn Net
remote monitoring
temperature, protect, power supply, Fohhn Net, Fohhn Audio Soft, AES/EBU signals
simulation beam
Fohhn Net, Fohhn Audio Soft

Connections and controls

mains connection
1 × PowerCON mains in, 1 × PowerCon mains out
control elements
mains switch (remote-controllable via AIREA connect)
inputs
1 × etherCON Airea Connect / stack link, 1 × XLR AES/EBU, 1 × etherCON Fohhn-Net
outputs
1 × etherCON stack link, 2 × XLR AES/EBU, 2 × etherCON Fohhn-Net
signal inputs
AES/EBU 32 kHz – 96 kHz, 16/24 bit
signal outputs
AES/EBU link-out from input

Display LEDs

Sign LED (connector panel and front grille)
blue = power on, blue flashing = sign
status LED
green = ready, red = protect/standby, red flashing = fault
receive / send LED
receive/send remote control LED
audio error LED
red = no AES/EBU
remote power LED
green = AIREA connect aktive, remote power on
on (stack link) LED
green = stack link aktive

power rating (peak); maximum SPL: peak, 20 ms with bandpass filtered pink noise signal according to IEC 60268-2 at one octave above the lower limit of the frequency range, with speaker preset
frequency range: -10 dB under anechoic halfspace-conditions with speaker preset
weight: net weight without optional equipment
heat dissipation: pink noise, 6 dB crest, 1/4 Pmax
nominal dispersion: -6 dB compared to the main dispersion axis

Contacto con nosotros

+49 7022 93323-0

Formulario de contacto Boletín de noticias de Fohhn