• +1

Focus Venue

FV-100

Número de artículo: 1315-XXXXX

El FV-100 es el módulo de alta frecuencia del sistema escalable Concert Sound Focus Venue . Este altavoz activo de alto rendimiento, en combinación con el módulo de bajos-medios FV-200 y los subwoofers PS-800 o PS-850, es la primera opción para el refuerzo sonoro de festivales medianos y grandes, estadios, salas de conciertos y teatros. Los módulos están equipados con la innovadora tecnología de amplificación de potencia, DSP y red digital de Fohhn. Gracias a Fohhn Beam Steering Technology, la dispersión puede controlarse en tiempo real y no es necesario inclinar el array mecánicamente. Esto hace posible una perfecta integración visual en la escenografía, la arquitectura y junto a grandes pantallas.

Características principales

  • Transductor de compresión de 8 × 1" y 8 × 1,4" (bobina móvil de 1,75" / 4")
  • Amplificador DSP de clase D de 16 × 220 W
  • rango de frecuencia: 800Hz - 16 kHz
  • Max. SPL: 150 dB (un módulo)
  • Cómodo control en tiempo real de la dispersión vertical con Fohhn Audio Soft
  • Ancho del haz vertical: de 0° a 90°, ángulo de inclinación del sonido: de -40° a +40° (ajustado en incrementos de 0,1°)
  • Tecnología de dos haces de Fohhn
  • Tecnología Fohhn Side Lobe Free
  • Cobertura sonora extremadamente uniforme y equilibrada, desde la primera hasta la última fila
  • Un aparejo rápido y seguro gracias a la integración de Fohhn Interlock System
  • Q-SYS Plugin disponible en combinación con Fohhn NA-4 o ABX-6

Colores

Tecnologías Fohhn

Posibles interfaces

Datos técnicos

Electroacoustic features

acoustic design
electronically steerable line array speaker
components
8 × 1" (1.75" VC) , 8 × 1.4" (4" VC) compression drivers Manifold hornloaded Waveguide Design
maximum SPL
150 dB (108 dB @ 100 m)
frequency range
800 Hz – 16 kHz
operational mode
active, 16-channel DSP-amplifier, Class-D
nominal dispersion, horizontal
90°
vertical beam width, digitally controlled
0° – 90° in 0.1° increments
vertical inclination angle, digitally controlled
-40° – +40° in 0.1° increments
acoustic centre
0% (bottom) to 100% (top), both beams movable

Physical features

enclosure
multiplex birch plywood
front design
hexagonal perforated steel grille in cabinet colour, backed by acoustically transparent foam
weight
approx. 107 kg
standard colours
scratch-proof polyurethane coating, black
mounting points
integrated flying tracks, 4 × M8-threads at rear tracks
dimensions (W × H × D)
560 × 639 × 595 mm

CAAD simulation data

simulation data
EASE, Fohhn Designer

Electronic features

amplifier type
Pure Path Digital PWM
audio inputs
AES/EBU
audio outputs
AES/EBU
amplifier power
16 × 220 W
DSP channels
16
frequency response
20 Hz – 20 kHz
signal/noise ratio
>105 dB/A
auto power save
adjustable from 1 s to 12 h, or never active
protective circuit
soft start, overtemperature, short circuit, overload
power supply
100 V – 240 V AC 50/60 Hz, power supply with Power Factor Correction (PFC)
power consumption
500 W RMS, idle 58 W, standby 10 W
heat dissipation
124 W, 427 BTU/h, 107 kcal/h
temperature range
0 – 40°C
cooling
temperature-controlled fan
weight (electronics)
10.9 kg

Controller

digital signal processors
2
independent limiters
6
FIR filter
yes
input gain
-80 dB – +12 dB
routing gain
-80 dB – +12 dB
output gain
-80 dB – +12 dB
EQ
10-band parametric EQ, gain, +/-12 dB, frequency 10 – 20 kHz, Q 0.1 – 100
selective 3-band limiting
bass / mid / high
limiter / compressor
yes
noise gate
yes
X-over
Linkwitz-Riley 4th order (24 dB/octave), high pass 10 Hz – 20 kHz, low pass 10 Hz – 20 kHz
delay input
0 – 350 ms (0 – 120 m)
delay output
0 – 640 ms (0 – 220 m)
system latency
1.2 ms
band-specific time constants
yes
filter technology
80-bit double precision
input
AES/EBU 32 kHz – 96 kHz, 16/24 bit
input DSP processing
yes

Remote control and remote monitoring

remote control
Fohhn Audio Soft, Fohhn Net
remote monitoring
temperature, protect, signals, power supply, Fohhn Net, Fohhn Audio Soft
simulation beam
Fohhn Net, Fohhn Audio Soft

Connections and controls

mains connection
1 × PowerCON mains in, 1 × PowerCon mains out
control elements
mains switch (remote-controllable via AIREA connect)
inputs
1 × etherCON Airea Connect / stack link, 1 × XLR AES/EBU, 1 × etherCON Fohhn-Net
outputs
1 × etherCON stack link, 2 × XLR AES/EBU, 2 × etherCON Fohhn-Net
signal inputs
AES/EBU 32 kHz – 96 kHz, 16/24 bit
signal outputs
AES/EBU link-out from input

Display LEDs

Sign LED (connector panel and front grille)
blue = power on, blue flashing = sign
status LED
green = ready, red = protect/standby, red flashing = fault
receive / send LED
receive/send remote control LED
audio error LED
red = no AES/EBU
remote power LED
green = AIREA connect aktive, remote power on
on (stack link) LED
green = stack link aktive

power rating (peak); maximum SPL: peak, 20 ms with bandpass filtered pink noise signal according to IEC 60268-2 at one octave above the lower limit of the frequency range, with speaker preset
frequency range: -10 dB under anechoic halfspace-conditions with speaker preset
weight: net weight without optional equipment
heat dissipation: pink noise, 6 dB crest, 1/4 Pmax
nominal dispersion: -6 dB compared to the main dispersion axis

Contacto con nosotros

+49 7022 93323-0

Formulario de contacto Boletín de noticias de Fohhn