Focus Venue

FV-100

The FV-100 is the high frequency module of the scalable Concert Sound System Focus Venue. The active high-performance loudspeaker, in combination with the FV-200 low-mid module and PS-800 or PS-850 subs, is the first choice for sound reinforcement of medium to large festivals, stadiums, concert halls, and theatres. The modules are equipped with innovative Fohhn power amp, DSP and digital network technology. Thanks to the Fohhn Beam Steering Technology, the dispersion can be controlled in real time and there is no need to angle the array mechanically. This makes perfect visual integration possible in stage design, architecture and next to large screens.

Main features

  • 8 × 1" and 8 × 1.4" compression driver (1,75" / 4" voice coil)
  • 16 × 250 W class-D DSP amplifier
  • frequency range: 800Hz – 16 kHz
  • Max. SPL: 150 dB (one module)
  • Convenient real-time control of vertical dispersion with Fohhn Audio Soft
  • Vertical beam width: 0° to 90°, sound inclination angle: -40° to +40° (adjusted in 0.1° increments)
  • Fohhn Two Beam Technology
  • Fohhn Side Lobe Free Technology
  • Extremely even and balanced sound coverage, from the front to the last row
  • Fast and safe rigging thanks to integrated Fohhn Interlock System

Colours

Fohhn technologies

Possible interfaces

Technical data

Electroacoustic features

acoustic design
electronically steerable line array speaker
components
8 × 1" (1.75" VC) , 8 × 1.4" (4" VC) compression drivers Manifold hornloaded Waveguide Design
maximum SPL
150 dB (108 dB @ 100 m)
frequency range
800 Hz – 16 kHz
operational mode
active, 16-channel DSP-amplifier, Class-D
beam dispersion angle, horizontal
90°
vertical beam width, digitally controlled
0° – 90° in 0.1° increments
vertical inclination angle, digitally controlled
-40° – +40° in 0.1° increments
acoustic centre
0% (bottom) to 100% (top), both beams movable

Features

enclosure
multiplex birch plywood
front design
hexagonal perforated steel grille in cabinet colour, backed by acoustically transparent foam
weight
approx. 107 kg
standard colours
scratch-proof polyurethane coating, black
mounting points
integrated flying tracks, 4 × M8-threads at rear tracks
dimensions (W × H × D)
560 × 639 × 595 mm

CAAD simulation data

simulation data
EASE

Electronic features

amplifier type
Pure Path Digital PWM
audio inputs
AES/EBU
audio outputs
AES/EBU
amplifier power
16 × 220 W
DSP channels
16
frequency response
20 Hz – 20 kHz
signal/noise ratio
>105 dB/A
auto power save
adjustable from 1 s to 12 h, or never active
protective circuit
soft start, overtemperature, short circuit, overload
power supply
100 V – 240 V AC 50/60 Hz, power supply with Power Factor Correction (PFC)
power consumption
500 W RMS, idle 58 W, standby 10 W
heat dissipation
124 W, 427 BTU/h, 107 kcal/h
temperature range
0 – 40°C
cooling
temperature-controlled fan
weight (electronics)
10.9 kg
AES/EBU

Controller

digital signal processors
2
independent limiters
6
FIR filter
yes
input gain
-80 dB – +12 dB
routing gain
-80 dB – +12 dB
output gain
-80 dB – +12 dB
EQ
10-band parametric EQ, Gain, +/-12 dB, Frequenz 10 – 20 kHz, Q 0.1 – 100
selective 3-band limiting
bass / mid / high
limiter / compressor
yes
noise gate
yes
X-over
Linkwitz-Riley 4th order (24 dB/octave), high pass 10 Hz – 20 kHz, low pass 10 Hz – 20 kHz
delay input
0 – 350 ms (0 – 120 m)
delay output
0 – 640 ms (0 – 220 m)
system latency
1.2 ms
band-specific time constants
yes
filter technology
80-bit double precision
input
AES/EBU 32 kHz – 96 kHz, 16/24 bit
Input DSP processing
yes

Remote control and remote monitoring

remote control
Fohhn Audio Soft, Fohhn-Net
remote monitoring
temperature, protect, signals, power supply, Fohhn Net, Fohhn Audio Soft
simulation beam
Fohhn-Net, Fohhn Audio Soft

Connections and controls

control elements
mains switch (remote-controllable via AIREA connect)
inputs
1 × etherCON Airea Connect / stack link, 1 × XLR AES/EBU, 1 × etherCON Fohhn-Net
outputs
1 × etherCON stack link, 2 × XLR AES/EBU, 2 × etherCON Fohhn-Net
signal inputs
AES/EBU 32 kHz – 96 kHz, 16/24 bit
signal outputs
AES/EBU link-out from input
mains connection
1 × PowerCON mains in, 1 × PowerCon mains out

Display LEDs

Sign LED (connector panel and front grille)
blue = power on, blue flashing = sign
status LED
green = ready, red = protect/standby, red flashing = fault
receive / send LED
receive/send remote control LED
audio error LED
red = no AES/EBU
remote power LED
green = AIREA connect aktive, remote power on
on (stack link) LED
green = stack link aktive

power rating (nominal/program): according to IEC-60268-5
power rating (peak); maximum SPL: peak, 20 ms with bandpass filtered pink noise signal according to IEC 60268-2 at one octave above the lower limit of the frequency range
sensitivity: 2,83 V at 8 ohms (2 V at 4 ohms, 4 V at 16 ohms) at a distance of 1 m under anechoic fullspace conditions
frequency range: -10 dB under anechoic halfspace-conditions
weight: net weight without optional equipment
Intelligent Protection Circuit (IPC): voltage-controlled semiconductor circuit protecting the HF-driver against overload highly effective and with very short attack time
cut-off frequency: -10 dB under anechoic halfspace-conditions with speaker preset
heat dissipation: pink noise, 6 dB crest, 1/4 Pmax

Contact us

+49 7022 93323-0

Contact form
Close menu