DLI-130 (fixed installation)

Focus

DLI-130 (fixed installation)

Install Mobile

The DLI-130 is a compact, electronically controllable line source speaker from the award-winning Focus series. The elegant high-performance speakers are the very first choice for professional voice and music applications. Thanks to the Fohhn Beam Steering Technology, they can be integrated almost invisibly and offer the best results in complex acoustic environments.

Main features

8 × 4" high performance driver (frequency response: 60 Hz – 17 kHz)
Built-in 8-channel digital amplifier, 8 DSP channels
SPL max.: 124 dB
Input interfaces: optionally AES/EBU + Fohhn Airea, Analog or Dante
Convenient real-time control of vertical dispersion with Fohhn Audio Soft
Vertical beam width: 0° to 90°, sound inclination angle: -40° to +40° (adjusted in 0.1° increments)
Acoustic centre displaceable over entire line length
Fohhn Two Beam Technology (two independent dispersion beams)
Fohhn Side Lobe Free Technology (suppression of side lobes)
Available in RAL, NCS, Pantone and with Fohhn Texture Design
Easily combined with active and passive Fohhn subwoofers
Integration in evacuation systems according to DIN EN 60849 / VDE 0828
Integration in media controls such as Crestron, AMX, Extron and more.
Green power standby mode

Colours

Fohhn technologies

Possible interfaces

Technical data

Electroacoustic features

acoustic design

electronically steerable line source speaker

components

8 × 4" impregnated (fully neodymium)

maximum SPL (1 m)

124 dB

operational mode

active, 8 × DSP amplifiers, Class-D

frequency range

60 Hz – 17 kHz

nominal dispersion, horizontal

110°

vertical beam width, digitally controlled

0° to +90° in 0.1° increments

vertical inclination angle, digitally controlled

-40° to +40° in 0.1°increments

acoustic centre

both beams moveable between 0 – 100 % (from speaker bottom to top)

Features

Optional features

CAAD simulation data

Electronic features

amplifier type

Pure Path Digital PWM

DSP channels, Fohhn Audio DSP

amplifier power

8 × 100 W

frequency response

20 Hz – 20 kHz

gain

25 dB

input sensitivity

0 dBFS

signal/noise ratio

>105 dB/A

tilt sensor

yes

password protection

yes

auto power save

adjustable from 1 s to 12 h, or permanently active

protective circuit

soft start, overtemperature, short circuit, overload

power consumption

Standby 5 W, max. 200 W

power factor (PFC)

> 90 %

low power

Green Power Standby Mode

heat dissipation

70 W, 239 BTU/h, 60 kcal/h (Pink Noise, 6 dB crest, 1/4 Pmax)

temperature range

0 – 40 °C

cooling

temperature-controlled fan

weight (electronics)

approx. 2 kg

Controller

digital signal processors

independent limiters

FIR filter

yes

gain

-80 dB – +12 dB

volume

-80 dB – +12 dB

EQ input

10 fully parametric filters, Gain +/-12 dB, Frequency 10 Hz – 20 kHz, Q 0.1 – 100

EQ output

10 fully parametric filters, Gain +/-12 dB, Frequency 10 Hz – 20 kHz, Q 0.1 – 100

selective 3-band limiting

bass / mid / high

limiter / compressor

2 × Input, 1 × Output

noise gate

2 × Input, 1 × Output

X-over

Linkwitz-Riley 4th order, 24 dB/octave, high pass 10 Hz – 20 kHz, low pass 10 Hz – 20 kHz, 2 × input, 1 × output in each case

delay input

0.01 – 350 ms or 3.4 mm – 120 m each

delay output

0.01 – 650 ms or 3.4 mm – 220 m each

user presets

100

simulation beam

Fohhn Net, Fohhn Audio Soft

system latency

1.80 ms

band-specific time constants

yes

filter technology

80-bit double precision

Inputs and outputs

Remote control and remote monitoring

Connections

Display

power rating (peak); maximum SPL: peak, 20 ms with bandpass filtered pink noise signal according to IEC 60268-2 at one octave above the lower limit of the frequency range
frequency range: -10 dB under anechoic halfspace-conditions
weight: net weight without optional equipment
heat dissipation: pink noise, 6 dB crest, 1/4 Pmax
nominal dispersion, beam width: -6 dB compared to the main dispersion axis