DI-4.2000

System Amplifiers

DI-4.2000

Item number: 6013-XXXXX

The DI-4.2000 is a digital 4-channel amplifier Made in Germany. The DSP amplifiers developed and manufactured by Fohhn offer high power density and excellent sound. The amplifiers are designed for mobile sound systems and fixed installation. They provide all the essential features and almost limitless connectivity in terms of audio inputs. Whether AES/EBU, Dante or Analogue – they offer maximum flexibility thanks to exchangeable connection modules. Corresponding speaker presets ensure optimum performance and reliability.

Main features

  • Output power: 4 × 2000 W / 4 ohms / 100 V / 70 V
  • Can be remotely operated and controlled over Fohhn Net
  • Extensive DSP, controllable in real time with the Fohhn Audio Soft
  • Q-SYS Plugin available
  • Maintains peak power over several seconds
  • Temperature controlled, low noise fan
  • Auto Power Save for minimum standby power requirements
  • Installation size: 2 U / 19"
  • Light weight, only 9.9 kg

Colours

Fohhn technologies

Possible interfaces

Technical data

Physical features

dimensions (w × h × d)
2 U / 19", 485 × 89 × 425 mm
weight
9.9 kg

Electronic features

amplifier technology
Class D
amplifier outputs
4
DSP routing (matrix)
4 × 4
frequency response
20 Hz – 20 kHz
signal/noise ratio
>100 dB (A)
THD+N
0.15 % (1 kHz, 8 ohms, 3 dB below clipping)
dynamic range
>120 dB
password protection
yes
auto power save
adjustable from 1 s to 12 h, or never active
protective circuit
over voltage protection, over current protection, over temperature protection, short-circuit protection, DC protection, power on delay, soft start and inrush current limit
power supply
100 – 240 V AC 50/60 Hz, universal power supply with Power Factor Correction (PFC)
power consumption
Maximum (RMS) 1800 W, idle state 90 W, auto power save 10 W, standby 5 W, power on/off switch / remote power off 2 W
heat dissipation
Maximal 300 W, 1020 BTU/h, 258 kcal/h
temperature range
0 – 40 °C
cooling
temperature-controlled fan
output power
4 × 2000 W / 4 ohms / 100 V / 70 V, 4 × 1000 W / 8 ohms (1 kHz, THD+N <1 %)
minimum impedance
4 ohms
input channels
4

Controller

digital signal processors
2
independent limiters
20
FIR filter
yes
input gain
-80 dB – +12 dB
routing gain
-80 dB – +12 dB
output gain
-80 dB – +12 dB
EQ
8 × 10 fully parametric filters, gain +/-12 dB, frequency 10 Hz – 20 kHz, Q 0.1 – 100
selective 3-band limiting
bass / mid / high
limiter / compressor
8
noise gate
8
delay
4 × 0 – 350 ms (0 – 120 m) outputs, 4 × 0 – 88 ms (0 – 30 m) inputs
X-over
8 × Linkwitz-Riley 4th order (24 dB/octave), high pass 10 Hz – 20 kHz, low pass 10 Hz – 20 kHz
user presets
100
speaker presets
100
system latency
1.2 ms
band-specific time constants
yes
filter technology
80-bit double precision
input
AES/EBU 32 kHz – 96 kHz, 16/24 bit
input DSP processing
yes

Remote control and remote monitoring

remote control
Fohhn Net over RS-485, Fohhn Audio Soft, USB-C
remote monitoring
temperature, protect, signals, power supply, Fohhn Net, Fohhn Audio Soft
fault message contact
1 × Relais, 2 × UM, 3-pin Phoenix
switching contact
load preset, standby on/off

Display (front)

receive / send LED
remote control, Fohhn-Net
ready LED
blue = Power on, blue flashing = Sign
protect LED
red = Error / Protect / Standby
input LED
4 × input signal LED, white = signal (> -50 dBFS), red = clip (> -3 dBFS)
output LED
4 × output signal LED, white = signal (> -50 dBFS)
USB Config LED
configuration via USB

Connections and controls

controls
Power on/off Switch
mains connection
1 × PowerCON
fault contact (open/close)
1 × Phoenix 3-pin
switching contact 1 and 2
1 × Phoenix 3-pin
remote power in / out
2 × Phoenix 2-pin
power supply for extern small devices 24 V / 5 W
1 × Phoenix 2-pin
24 V / 5 W power LED
green = on
USB Config
1 × USB-C socket

weight: net weight without optional equipment
heat dissipation: pink noise, 6 dB crest, 1/4 Pmax

Connection variants

Standard input interface (AES/EBU)

Features

inputs
2 × Phoenix 3-pin AES/EBU, 1 × Phoenix 3-pin Fohhn-Net
outputs
2 × Phoenix 3-pin AES/EBU, 1 x Phoenix 3-pin Fohhn-Net
signal inputs
AES/EBU 32 kHz – 96 kHz, 16/24 bit
signal outputs
AES/EBU link out from input
latency
0.0 ms

Input interface AES/EBU XLR

Features

inputs
2 × XLR AES/EBU, 1 × etherCON Fohhn-Net
outputs
2 × XLR AES/EBU, 1 x etherCON Fohhn-Net
signal inputs
AES/EBU 32 kHz – 96 kHz, 16/24 bit
signal outputs
AES/EBU link out from input
latency
0.0 ms

Input interface analog XLR

Features

inputs
4 × XLR analogue, 1 × etherCON Fohhn-Net
outputs
4 × XLR analogue, 1 × etherCON Fohhn-Net
signal inputs
analog, max. level +15 dBu
signal outputs
analog link out from input
frequency response
20 Hz – 20 kHz (+/- 0,3dB @ 8 Ohm)
THD
<0.003 % typ., <0.0005 % 1 kHz 0 dBu
S/N ratio
>110 dB/A
input impedance
10 k ohms
latency
1.0 ms

Input interface Dante Ultimo (DUC)

Features

integration in media control
UDP text protocol
support for AES67
Yes
latency
Dante +0.6 ms
inputs
1 × RJ-45 100BASE-T Ethernet, Dante and Fohhn-Net
audio input channels
4
audio link
No
redundancy
No

Output option Speakon

Features

outputs
4 × Speakon

Output option terminal blocks

Features

outputs
2 × Phoenix 4-pin
conductor cross-section
max. 6 mm² flexible, 10 mm² rigid
product name
OUT 20

Be the first to know!

Newsletter subscription

Nobody likes spam - neither do we. From time to time you will instead receive news, announcements and knowledge tranfser relevant to you from our pro audio experts.

Contact us

+49 7022 93323-0

Contact form Fohhn Newsletter