Focus Modular


Item number: 1341-XXXXX

DFM-110 is an active high frequency module with Fohhn Beam Steering technology. It can be flexibly combined with the low-mid modules DFM-400. The new generation of our renowned Focus Modular system is now fully digitized and provides further developed Fohhn DSP and digital signal connections. Acoustically redesigned and equipped with even more powerful drivers, DFM delivers excellent, audiophile sound and best speech intelligibility. A high-quality and high-performance solution for larger conference rooms, theaters and even open-air concerts. And all of this with an enclosure that is just about 22 cm wide and can be flown straight and integrated seamlessly thanks to beam steering.

Main features

  • 16 × 1" compression drivers with 1.75" voice coil, hornloaded with waveguide
  • 16 integrated class-D amplifiers
  • Optimized Fohhn DSP structure inside
  • Fully digital signal flow from input to amplifier
  • Q-SYS Plugin available in combination with Fohhn NA-4 or ABX-6
  • Max. SPL single module: 148 dB (108 dB @ 100 m)
  • Vertical dispersion controlled in real time via Fohhn Audio Soft
  • Vertical beam width: 0° to 90°, sound inclination angle: -40° to +40° (adjusted in 0.1° increments)
  • two separate beams can be controlled
  • Fohhn Side Lobe Free Technology
  • Easy rigging thanks to the Fohhn Quicklock System


Fohhn technologies

Possible interfaces

Technical data

Electroacoustic features

acoustic design
electronically steerable line array speaker
16 × 1" (1.75" VC) compression drivers Hornloaded Waveguide Design
maximum SPL
148 dB (108 dB @ 100 m)
frequency range
1.7 kHz – 16 kHz
operational mode
active, 16-channel DSP-amplifier, Class-D
horizontal dispersion
vertical beam width, digitally controlled
0° – 90° in 0.1° increments
vertical inclination angle, digitally controlled
-40° – +40° in 0.1° increments
acoustic centre
0% (bottom) to 100% (top) movable, both beams

Physical features

multiplex birch playwood, Aluminium
front design
hexagonal perforated steel grille in enclosure colour, backed by acoustically transparent foam
protection grille
steel grille, ball impact resistant, powder-coated
41 kg
standard colours
textured paint / powder coating, black
mounting points
integrated flying tracks, 4 × M8-threads at rear
dimensions (w × h × d)
224 × 1285 × 274 mm

Optional features

optional colours
RAL Classic / NCS / Pantone on request

CAAD simulation data

simulation data
EASE, Fohhn Designer

Electronic features

amplifier type
Pure Path Digital PWM
audio inputs
audio outputs
amplifier power
16 × 120 W
DSP channels
frequency response
20 Hz – 20 kHz
signal/noise ratio
>105 dB/A
auto power save
adjustable from 1 s to 12 h, or never active
protective circuit
soft start, overtemperature, short circuit, overload
power supply
100 V – 240 V AC 50/60 Hz, power supply with Power Factor Correction (PFC)
inrush current
7,5 A (230 V) / 3,8 A (115 V)
power consumption
500 W RMS, idle 30 W, standby 10 W
heat dissipation
140 W, 482 BTU/h, 121 kcal/h
temperature range
0 – 40° C
temperature-controlled fan
weight (electronics)
5.5 kg


digital signal processors
independent limiters
FIR filter
-80 dB – +12 dB
10-band parametric EQ, gain, +/-12 dB, frequency 10 – 20 kHz, Q 0.1 – 100
selective 3-band limiting
bass / mid / high
limiter / compressor
noise gate
Input: 0 – 350 ms (0 – 120 m); Output: 0 – 640 ms (0 – 220 m)
Linkwitz-Riley 4th order (24 dB / octave), high pass 10 Hz – 20 kHz, low pass 10 Hz – 20 kHz
system latency
1.2 ms
band-specific time constants
filter technology
80-bit double precision
AES/EBU 32 kHz – 96 kHz, 16/24 bit
input DSP processing

Remote control and remote monitoring

remote control
Fohhn Audio Soft, Fohhn Net
remote monitoring
temperature, protect, signals, power supply, Fohhn Net, Fohhn Audio Soft
simulation beam
Fohhn Net, Fohhn Audio Soft

Connections and controls

mains switch (remote-controllable via Airea Connect)
mains connection
1 × PowerCON mains in, 1 × PowerCon mains out
1 × etherCON Airea Connect / stack link, 1 × XLR AES/EBU, 1 × etherCON Fohhn Net
1 × etherCON stack link, 2 × XLR AES/EBU, 2 × etherCON Fohhn Net
signal inputs
AES/EBU 32 kHz – 96 kHz, 16/24 bit
signal outputs
AES/EBU link-out from input

Display LEDs

Sign LED (connector panel and front grille)
blue = power on, blue flashing = sign
status LED
green = ready, red = protect / standby, red flashing = fault
receive / send LED
receive / send remote control LED
audio error LED
red = no AES/EBU
remote power LED
green = Airea Connect active, remote power on
on (stack link) LED
green = stack link active

power rating (peak); maximum SPL: peak, 20 ms with bandpass filtered pink noise signal according to IEC 60268-2 at one octave above the lower limit of the frequency range, with speaker preset
frequency range: -10 dB under anechoic halfspace-conditions with speaker preset
weight: net weight without optional equipment
heat dissipation: pink noise, 6 dB crest, 1/4 Pmax
nominal dispersion: -6 dB compared to the main dispersion axis

Contact us

+49 7022 93323-0

Contact form Fohhn Newsletter