AAX-2.300

Airea

AAX-2.300

Item number: 1720-XXXXX

The AAX-2.300 is an amplifier module that allows passive speakers to be integrated into a Fohhn Airea system.

Main features

  • Connection: Fohhn Airea (RJ-45 network connector)
  • Speaker outputs: 2 × Speakon
  • Amplifier power: 2 × 300 W (4 ohms)
  • Power consumption: via Fohhn Airea, net load max. 200 W
  • Digital DSP amplifier (type Pure Path Digital)
  • Q-SYS Plugin available in combination with Fohhn NA-4 or ABX-6

Colours

Fohhn technologies

Possible interfaces

Technical data

Physical features

dimensions (w × h × d)
170 × 60 × 130 mm

Electronic features

amplifier technology
Pure Path Digital PWM
input sensitivity
-6 V
audio inputs
2 independent audio channels, AES/EBU 32 kHz – 96 kHz, 16/24 Bit
audio outputs
2 × 300 W to 2 × Speakon
frequency response
20 Hz – 20 kHz
gain
30 dB
signal/noise ratio
>105 dB/A
THD
<0,05 % typ., <0,01 % 1 kHz -6 dB
protective circuit
soft start, overtemperature, short circuit, overload
power supply
Airea-Net 48 V
power consumption
Standby 5 W, AIREA-Net Load max. 200 W
protection
integrated semiconductor fuse
low power
Green Power Standby Mode
emergency current
with extern USV
heat dissipation
40 W, 135 BTU/h, 34 kcal/h (Pink Noise, 6 dB crest, 1/4 Pmax)
cooling
passive
output power
2 × 300 W
minimum impedance
4 ohms

Controller

digital signal processors
4
independent limiters
8
FIR filter
yes
gain
-80 dB – +12 dB
volume
-80 dB – +12 dB
EQ
2 × 10 fully parametric filters, gain +/-12 dB, frequency 10 Hz – 20 kHz, Q 0.1 – 100
selective 3-band limiting
bass / mid / high
limiter / compressor
2
noise gate
2
delay
2 × 0 – 72 ms (0 – 25 m)
X-over
Linkwitz-Riley 4. order, 24 dB/octave, high pass 10 Hz – 20 kHz, low pass 10 Hz – 20 kHz
user presets
100
band-specific time constants
yes
filter technology
56-bit double precision
input
AES/EBU 32 kHz – 96 kHz, 16/24 Bit

Display LEDs

sign, identification front LED
blue, blue flashing
network control
receive/send remote control LED
power on / off (standby)
green = on, red = standby, flashing = fault
standby
red, flashing = fault
sign, identification
blue, blue flashing

heat dissipation: pink noise, 6 dB crest, 1/4 Pmax

Be the first to know!

Newsletter subscription

Nobody likes spam - neither do we. From time to time you will instead receive news, announcements and knowledge tranfser relevant to you from our pro audio experts.

Contact us

+49 7022 93323-0

Contact form Fohhn Newsletter