Important note: We are currently performing an update on the Fohhn website. If you receive error messages or content is missing, please reload the desired page or try again later. Thanks for your patience!

Wichtiger Hinweis: Wir führen gerade Wartungs- und Updatearbeiten an der Fohhn Website durch. Bitte laden Sie die Seite neu oder versuchen Sie es später erneut, falls Sie Fehlermeldungen erhalten. Danke für Ihre Geduld.

Ny

Systemforstærkere MA-2.1200

Varenummer: 6032-XXXXX

MA-2.1200 er en kompakt 2-kanals digital forstærker med en 4 × 2 routing-matrix. Det er en kraftfuld og pålidelig komponent i din faste installation og er ekstremt fleksibelt og omkostningseffektivt. Integrationen i mediekontroller og lydnetværk er mulig uden problemer, og konfigurationen kan også foretages meget nemt via et USB-C-stik med Fohhn Audio Soft.

Main features

  • Udgangseffekt: 2 × 1200 W / 4 ohm / 100 V / 70 V
  • Fås i to varianter: Med analoge indgange (MA-2.1200 ANA) eller Dante Indgang (MA-2.1200 DAN)
  • Kompakt og let: 1 HE, 5,2 kg
  • Monteringsbeslag til rack medfølger
  • To frit programmerbare koblingskontakter
  • Med Fohhn Airea forbindelse
  • Kan fjernbetjenes og styres via Fohhn Net
  • Q-SYS Plugin fås i kombination med Fohhn NA-4 eller ABX-6
  • Temperaturstyret, støjsvag ventilator
  • Auto Power Save for minimumskrav til standbyeffekt
  • Fohhn-højttalerforindstillinger sikrer maksimal sikkerhed, pålidelighed og fremragende lydkvalitet
  • 100% udviklet og fremstillet i Tyskland

Farver

Fohhn-teknologier

Mulige interfaces

Tekniske data

Physical features

weight
5.2 kg
dimensions (w × h × d)
1 U / 19", 440 × 45 × 370 mm

Electronic features

amplifier technology
Class D
amplifier outputs
2
DSP routing (matrix)
4 × 2
frequency response
20 Hz – 20 kHz
signal/noise ratio
> 103 dB/A
THD+N
0,15 % (1 kHz, 8 ohms, 3 dB below clipping)
dynamic range
> 120 dB
password protection
yes
auto power save
adjustable from 1 s to 12 h, or never active
protective circuit
over voltage protection, over current protection, over temperature protection, short-circuit protection, DC protection, power on delay, soft start and inrush current limit
power supply
100 – 240 V AC 50/60 Hz, universal power supply with Power Factor Correction (PFC)
power consumption
maximum 700 W, idle state 45 W, Auto Power Save 2 W, standby 2 W
heat dissipation
max. 120 W, 410 BTU/h, 104 kcal/h
temperature range
0 – 40°C
cooling
temperature-controlled fan
output power
2 × 1200 W / 4 ohms, 2 × 600 W / 8 ohms (1 kHz, THD+N < 1 %)
minimum impedance
4 ohms
input channels
4

Controller

digital signal processors
1
independent limiters
20
FIR filter
yes
input gain
-80 dB – +12 dB
routing gain
-80 dB – +12 dB
output gain
-80 dB – +12 dB
EQ
8 × 10 fully parametric filters, gain +/-12 dB, frequency 10 Hz – 20 kHz, Q 0.1 – 100
selective 3-band limiting
bass / mid / high
limiter / compressor
8
noise gate
8
delay
4 × 0 – 145 ms (0 – 50 m) outputs, 4 × 0 – 30 ms (0 – 10 m) inputs
X-over
8 × Linkwitz/Riley 4th order, 24dB/oktave, highpass 10 Hz – 20 kHz, lowpass 10 Hz – 20 kHz
user presets
100
speaker presets
100
system latency
1.2 ms
band-specific time constants
yes
filter technology
80-bit double precision
input
AES/EBU 32 kHz – 96 kHz, 16/24 bit
input DSP processing
yes

Remote control and remote monitoring

remote control
Fohhn Net over RS-485, Fohhn Audio Soft, USB-C
remote monitoring
temperature, protect, signals, power supply, Fohhn Net, Fohhn Audio Soft
switching contact
load preset, standby on / off

Display (front)

ready LED
blue = power on, blue flashing = sign
protect LED
red = error / protect / standby
USB Config LED
blue = host, remote control over USB

Connections and controls

mains connection
1 × C14 IEC socket
switching contact 1 and 2
1 × Phoenix 3-pin
Airea Net
1 × RJ-45
outputs
1 × Phoenix 4-pin, max. 3.3 mm² flexibel, 3.3 mm² rigid
USB Config
1 × USB-C socket

Display (rear)

receive / send LED
remote control, Fohhn Net

Input interface analog

latency
1.0 ms
S/N ratio
> 108 dB/A
THD
< 0,005 % typ. < 0,003 % 1 kHz 0 dBu
signal inputs
analog, max. signal +18 dBu, phantompower (24 V DC) switchable
inputs
4 × analog
input impedance
10 kOhms
frequency response
20 Hz – 20 kHz

weight: net weight without optional equipment
heat dissipation: pink noise, 6 dB crest, 1/4 Pmax

Tilslutningsvarianter

Indgangsgrænseflade Dante (DAN)

Features

support for AES67
yes
latency
Dante + 0.6 ms
inputs
1 × RJ-45 100BASE-T Ethernet, Dante, 4 × 48 kHz

Kontakt os

+49 7022 93323-0

Kontaktformular Fohhn Nyhedsbrev