Produkter

DI-2.4000

Systemforstærkere DI-2.4000

Varenummer: 6012-XXXXX

DI-2.4000 er en digital 2-kanals forstærker Made in Germany. DSP-forstærkerne, der er udviklet og fremstillet af Fohhn, har høj effekttæthed og fremragende lyd. Forstærkerne er designet til mobile lydsystemer og faste installationer. De har alle de nødvendige funktioner og næsten ubegrænsede tilslutningsmuligheder med hensyn til lydindgange. Uanset om det er AES/EBU, Dante eller analogt - de tilbyder maksimal fleksibilitet takket være udskiftelige forbindelsesmoduler. Tilsvarende højttalerindstillinger sikrer optimal ydeevne og pålidelighed.

Main features

  • Udgangseffekt: 2 × 4000 W / 4 ohm / 100 V / 70 V
  • Kan fjernbetjenes og kontrolleres over Fohhn Net
  • Omfattende DSP, der kan kontrolleres i realtid med Fohhn Audio Soft
  • Q-SYS Plugin tilgængelig
  • Bevarer maksimal effekt i flere sekunder
  • Temperaturstyret, støjsvag ventilator
  • Auto Power Save for minimumskrav til standbyeffekt
  • Installationsstørrelse: 2 U / 19"
  • Let vægt, kun 9,8 kg

Farver

Fohhn teknologier

Mulige interfaces

Tekniske data

Physical features

dimensions (w × h × d)
2 U / 19", 485 × 89 × 425 mm
weight
9.8 kg

Electronic features

amplifier technology
Class D
amplifier outputs
2
DSP routing (matrix)
4 × 2
frequency response
20 Hz – 20 kHz (+/- 0,3dB @ 8 Ohm)
signal/noise ratio
>100 dB (A)
THD+N
0.15 % (1 kHz, 8 ohms, 3 dB below clipping)
dynamic range
>120 dB
password protection
yes
auto power save
adjustable from 1 s to 12 h, or never active
protective circuit
over voltage protection, over current protection, over temperature protection, short-circuit protection, DC protection, power on delay, soft start and inrush current limit
power supply
100 – 240 V AC 50/60 Hz, universal power supply with Power Factor Correction (PFC)
power consumption
Maximum (RMS) 1800 W, idle state 80 W, auto power save 10 W, standby 5 W, power on/off switch / remote power off 2 W
heat dissipation
Maximal 300 W, 1020 BTU/h, 258 kcal/h
temperature range
0 – 40 °C
cooling
temperature-controlled fan
output power
2 × 4000 W / 4 ohms / 100 V / 70 V, 2 × 2000 W / 8 ohms (1 kHz, THD+N <1 %)
minimum impedance
4 ohms
input channels
4

Controller

digital signal processors
2
independent limiters
12
FIR filter
yes
input gain
-80 dB – +12 dB
routing gain
-80 dB – +12 dB
output gain
-80 dB – +12 dB
EQ
6 × 10 fully parametric filters, gain +/-12 dB, frequency 10 Hz – 20 kHz, Q 0.1 – 100
selective 3-band limiting
bass / mid / high
limiter / compressor
6
noise gate
6
delay
2 × 0 – 350 ms (0 – 120 m) outputs, 4 × 0 – 88 ms (0 – 30 m) inputs
X-over
6 × Linkwitz-Riley 4th order (24 dB/octave), high pass 10 Hz – 20 kHz, low pass 10 Hz – 20 kHz
user presets
100
speaker presets
100
system latency
1.2 ms
band-specific time constants
yes
filter technology
80-bit double precision
input
AES/EBU 32 kHz – 96 kHz, 16/24 bit
input DSP processing
yes

Remote control and remote monitoring

remote control
Fohhn Net over RS-485, Fohhn Audio Soft, USB-C
remote monitoring
temperature, protect, signals, power supply, Fohhn Net, Fohhn Audio Soft
fault message contact
1 × Relais, 2 × UM, 3-pin Phoenix
switching contact
load preset, standby on/off

Display (front)

receive / send LED
remote control, Fohhn-Net
ready LED
blue = Power on, blue flashing = Sign
protect LED
red = Error / Protect / Standby
input LED
4 × input signal LED, white = signal (> -50 dBFS), red = clip (> -3 dBFS)
output LED
2 × output signal LED, white = signal (> -50 dBFS)
USB Config LED
configuration via USB

Connections and controls

controls
Power on/off Switch
mains connection
1 × PowerCON
fault contact (open/close)
1 × Phoenix 3-pin
switching contact 1 and 2
1 × Phoenix 3-pin
remote power in / out
2 × Phoenix 2-pin
power supply for extern small devices 24 V / 5 W
1 × Phoenix 2-pin
24 V / 5 W power LED
green = on
USB Config
1 × USB-C socket

weight: net weight without optional equipment
heat dissipation: pink noise, 6 dB crest, 1/4 Pmax

Tilslutningsvarianter

Standard input interface (AES/EBU)

Features

inputs
2 × Phoenix 3-pin AES/EBU, 1 × Phoenix 3-pin Fohhn-Net
outputs
2 × Phoenix 3-pin AES/EBU, 1 x Phoenix 3-pin Fohhn-Net
signal inputs
AES/EBU 32 kHz – 96 kHz, 16/24 bit
signal outputs
AES/EBU link out from input
latency
0.0 ms

Indgangsgrænseflade AES/EBU XLR

Features

inputs
2 × XLR AES/EBU, 1 × etherCON Fohhn-Net
outputs
2 × XLR AES/EBU, 1 x etherCON Fohhn-Net
signal inputs
AES/EBU 32 kHz – 96 kHz, 16/24 bit
signal outputs
AES/EBU link out from input
latency
0.0 ms

Indgangsgrænseflade analog XLR

Features

inputs
4 × XLR analogue, 1 × etherCON Fohhn-Net
outputs
4 × XLR analogue, 1 × etherCON Fohhn-Net
signal inputs
analog, max. level +15 dBu
signal outputs
analog link out from input
frequency response
20 Hz – 20 kHz
THD
<0,003 % typ., < 0,0005% 1 kHz 0 dBu
S/N ratio
>110 dB/A
input impedance
10 k ohms
latency
1.0 ms

Indgangsgrænseflade Dante Ultimo (DUC)

Features

integration in media control
UDP text protocol
support for AES67
Yes
latency
Dante +0.6 ms
inputs
1 × RJ-45 100BASE-T Ethernet, Dante and Fohhn-Net
audio input channels
4
audio link
No
redundancy
No

Output mulighed Speakon

Features

outputs
2 × Speakon

Terminalblokke til udgangsmuligheder

Features

outputs
1 × Phoenix 4-pin
conductor cross-section
max. 6 mm² flexible, 10 mm² rigid

Vær den første til at få besked!

Abonnement på nyhedsbrev

Ingen kan lide spam - og det kan vi heller ikke. Fra tid til anden vil du i stedet modtage nyheder, meddelelser og viden, der er relevante for dig, fra vores pro audio eksperter.

Kontakt os

+49 7022 93323-0

Kontaktformular Fohhn Nyhedsbrev