XS-30 active

X-Sub active

<--- click to increase and see picture gallery!

 

 

 

 

>Description<
The new XS-30 active subwoofer with 1.500 W is even more powerful than its predecessor. The XS-30 can also power a passive XSP-3 Sub. At approx. 29 kg the XS-30 is the lightest Sub in its class and is equipped with the following components:

Digital amplifiers (CLASS D, 1.500 W): latest technology, extremely efficient, low weight, outstanding impulse characteristics, transparent sound.
Two digital stereo signal processors (Fohhn Audio DSPs): perfect sound at all levels, maximum operating reliability, room presets, integral audio equipment such as EQ, delay, signal processor. 15" long excursion speaker: state-of-the-art neodymium technology, extremely powerful for a full, deep sound.

>Easy to operate<
A control panel with a blue, four-line LCD display is integrated in the active Sub so that users can adjust and view the DSP functions. The system´s network compatibility and remote control options via a laptop provide you with assistance while you work. For connecting the active Sub to a PC the Fohhn-Net Adaptor NA-1 is necessary.

>Fohhn® Mains Control – the integrated mains supply monitoring system<
During use, the supply to the amplifier is constantly monitored. If at any time it exceeds the maximum permitted range (180-255 VAC), the supply will be interrupted. During power up it also minimizes the input surge current by switching on at the mains voltage zero crossing.

XS-30 active

 
electro-acoustical features  
acoustic design vented design
components 1x 15“ long excursion, neodymium
amplifier output 1.500 W
SPL max. 128 dB
frequency range 35 Hz – 130 Hz
   
features  
enclosure multiplex birch wood
protection grille metal, powder coating
standard colour black, textured paint
front design acoustic foam
dimensions (W x H x D) approx. 43 x 59 x 52 cm
weight approx. 29 kg
wheels 2 edge wheels
handles 2 side handle,
2 edge handle
thread plate for distance piece M20
   
optional features  
optional colours all RAL-colours
weather resistance scratch-proof plastic coating
   
digital amplifier (integrated in Sub)  
EIA amplifier power Tops 2x 750 W**
(1 kHz, THD+N < 1%)
Bridge mode 1.500 W
amplification 32 dB
input sensitivity 1.4 V
input impedance 10 kOhm
frequency response 20 Hz – 20 kHz
S/N Ratio >105 dBA
protective circuit switch-on delay, soft start,
impedance- and short-circuit protection,
DC protect, temperature monitoring
remote control Fohhn-Net, Fohhn Audio Soft
remote monitoring temperature, protect, signals
power supply 195 V–250 V AC 50/60 Hz, max. 6 A
temperature range 0 - 45°C
cooling convection cooling, force cooling,
if necessary termperature-controlled fan
weight approx. 1.8 kg power supply and amplifier
**each 4 ohms from 130 Hz via high-pass 6 dB/Okt.  
controller 2 digital signal processors
8 independent limiters
selective 3-band limiting (bass/mid/high)
band specific time constants
56-bit double precision filter technology
AD/DA 24 bit/48 kHz
controls Select potentiometer
4 buttons for DSP handling
ground/lift switch
Power on/off switch
indicator LEDs 4 line display
2x Signal/Clip LED
2x run/protect LED
receive / send remote LED
connectors  
inputs 2x XLR/jacks,
multifunctional input jacks
signal Input jack
2x XLR Link jacks
outputs 2x NL4 Neutrik Speakon for Top Speaker and Slave Sub
from 130 Hz 2x 4 ohms (stereo)
or 1x 8 ohms (bridge mode) mains
   
>Fohhn® Mains Control – the integrated mains supply monitoring system<
During use, the supply to the amplifier is constantly monitored. If at any time it exceeds the maximum permitted range (180-255 VAC), the supply will be interrupted. During power up it also minimizes the input surge current by switching on at the mains voltage zero crossing.
 

Transport covers

Padded high-quality covers.

NA-11 Fohhn-Net USB Adapter

NA-11 Fohhn-Net USB adapter. Extensionable with XLR microphone cable. Aluminium housing and adapter cable.

Fohhn Audio Soft

Easy, convenient handling. Laptop and Fohhn Audio Software for intuitive control and monitoring of all connected Fohhn audio devices with integrated DSP. Clear graphical user interface for rapid access to the speaker database, status display and all audio devices integrated in the Fohhn DSP.

Free Stand IX / X / XI

Freestanding loudspeaker stand with base, featuring the same housing design as the Linea Focus. Suitable for LF-120 / 220, as well as DL-130/230 and LFI-350* / 450*. Stand base includes integral mains, network and audio connection sockets. Speaker cables can be concealed within the actual stand. *on request

DR-1

Distanzrohr mit M20 Gewinde

   
Fohhn across the Social Web